@charles1dad, I did not consider replacing the internal wiring. I have used Coincident wire externally, and found it to compare well with a few other options in the same price range, so I didn't think it would be an experiment with a high probability of success. I did use a few inches of Duelund Tin/Copper here and there where I needed to make things work, as there was nothing extra to work with. I also did not consider replacing the binding posts. I spent ~ 1200 on the project, and don't feel compelled to go any further. I am more than pleased with the speakers as they now stand, so at least in my case, going further might well be diminishing returns.
The op is starting with speakers that are several levels better than my super victorys in stock form. I think replacing the solen cap in the PRE is a no brainer, and would advise he start there and proceed slowly. I suspect the Duelund by=pass caps might give the accutrons a bit too much resolution. They are not lacking in air and extension even with the Solens, and he could end up with a hyper detailed presentation would be my concern.
The op is starting with speakers that are several levels better than my super victorys in stock form. I think replacing the solen cap in the PRE is a no brainer, and would advise he start there and proceed slowly. I suspect the Duelund by=pass caps might give the accutrons a bit too much resolution. They are not lacking in air and extension even with the Solens, and he could end up with a hyper detailed presentation would be my concern.