2. analog
  3. 150186-119399

Best Record Cleaning Fluid

Greetings All,

I’ve spend the last few days searching and reading about record cleaning fluids for my cleaning machine (Okki Nikki).  Wow - there are a lot of options out there.  Many more than I originally thought.  Some real esoteric stuff that costs a pretty penny.  I’m currently going through my entire collection, cleaning it, listening to it and adding it to a Discogs DB.  Want to finally know how many I have and have a list of them.  But doing this has resulted in me going through cleaning fluid rather quickly.

So many options, so many perspectives on what are the best fluids.  What do you all say.  I understand that alcohol is a no-no for fluids, but I can’t find out if some of them include alcohol or not.  Currently using up the fluid that came with the machine, but no where can I read it if has bad ingredients.

The 2-stage or 3-stage cleaning systems are not going to happen.  I did get a bottle of Revolv that I was told was good, and use if for new high quality pressings (as opposed to those I bought in high school).

Anyway, would appreciate some perspectives on good quality record cleaning fluids that don’t bust the bank.  Thanks for keeping the sarcasm in check.

Happy Listening,

pgaulke60
mijostyn's avatar
mijostyn
8,570 posts
 
Right on cleeds. There is a method to handling records. As cleeds relates do not touch the playing surface. ljgerens you are right in regards to oils. They are very fugitive however if you wash your hands before handling the records the transfer of skin oils to the record is minimal if you are handling the record correctly. But if you like wearing clean room gloves and get them cheap why not. I have never worn clean room gloves and you will never find a finger print on any of my records. 
CuCL2 is brown. It absorbs moisture to form the dihydrate which is light blue. To form Malachite or Brochantite, both green, copper is fully oxidized then on exposure to atmospheric contaminants forms these compounds also termed patina.  Chlorine is not involved. The only references I can find in regard to PVC releasing HCL relate this to the PVC being burned like in a house fire. 
ljgerens
155 posts
 
Yes if the copper chloride is perfectly dry it is a yellow-brown color but in the presence of moisture it easily forms the dihydrate which is a green color. This is what you typically see due to moisture in the atmosphere. Copper chloride is always hydrated to some extent on exposure to atmosphere and forms green crystals.

Unstabilized PVC undergoes dehydrohalogenation very readily on exposure to UV or heat. The dehydrohalogenation process releases HCl. I studied this extensively using Photoelectron Spectroscopy as I stated before. The added stabilizers slow down the process but do not completely eliminate it.

The dehydrohalogenation processs takes place at the surface initially (the upper 5 to 10 nanometers) and slowly works its way into the bulk. This initial process which occurs within minutes of UV exposure can only be detected with a surface analysis technique like Photoelectron Spectroscopy or Static Secondary Ion Mass Spectrometry. 

As far as heat, the surface dehydrohalogenation begins to occur at temperatures of 70 to 90 degrees C (160 to 190 F).

The combination of UV and elevated temperatures (greater than 100 degrees F) speeds up the process significantly.
terry9
2,333 posts
 
Several people have written about the importance of rinsing, if you use a surfactant. I agree.

I use a commercial US cleaner. It's better and cheaper than many audiophile alternatives. I also use lab grade surfactant for a whole bunch of reasons, like it actually is what the documentation says it is.

VersaClean from Fisher Scientific, especially formulated for plastics.
audio_d
56 posts
 
back in the 1990s myles astor did a survey of rcf's for sounds like magazine. he examined the chemistry behind the formulations and conducted listening tests. the top fluid was vpi, followed by nitty gritty purifier 2.
you can't go wrong with any of the name fluids like nitty gritty, vpi, mofi, disc doctor etc.
mijostyn's avatar
mijostyn
8,570 posts
 
Thanx for the explanation ljergens. Obviously I was wrong. I believe during the stamping process PVC temperatures reach 300 F. Carbon Black is obviously added to all black records and I have read that it contains lead which acts as a stabilizer.Medical PVC has the phthalate DEHP in it which has been studies intensively for side effects in animals. I believe phthalates are the most common plasticizers but I can not find any mention of them being added to PVC for records. The PVC for records comes in bags of pellets that are premixed with carbon black and whatever else is in there. I am trying to find out who supplies the pellets to firm up the list of compounds added to the PVC and their concentrations. The next question is will Isopropyl alcohol damage records. I believe this is a myth. I have an old record sitting in a tub of 91% isopropyl alcohol now. It has been in it for 3 days.  
Very creative Terry9. At least you know what is in there unlike all the audiophile stuff. 
More to discover