Klipsch Heresy IV - not what I was expecting


I haven't felt the need to share my thoughts on a piece of audio equipment for some time. About 2 months ago, I purchased Heresy IV speakers kind of on a whim to hear horn speakers. With no local dealers, I bought them on Amazon with the thought that I can just return them if I didn't like them. At just 45lbs a piece, repackaging them would not be a big deal either. Most of my speakers have been monitors (Reference 3A mm de capo i, Merlin TSM mxr w/ Master RC networks, B&W 805 D3) with a Prima Luna Dialogue Premium integrated running EL34s and Berkeley Alpha DAC with an Auralic Aries Femto music server. My music tastes are wide ranging digital so long as the recording quality is very good.

Over the years, I had several folks cup their hands around their mouths to describe horns so I had a somewhat negative view going in. I had never heard horns prior. In hindsight now, the differences between my other monitors are more subtle -- some image a bit better, some had better low base control, extension, dynamics, etc. But with the Heresy's the music sounds very different from the others. It is more immediate and present (and fun). Some sounds actually startle me. They are not harsh and do not sound like "cupped hands". The Heresy's do not image as well as my other monitors - can't get that barking dog on "Amused to Death" to sound like it's coming from behind me -- but their imaging is still pretty good. It's just more of a larger but less delineated presentation. The Heresy's bass does fall off around 45Hz but my JL audio fixes that, as it does with my other monitors.  The bass down to 45Hz is tight and fast.

I bought the walnut version and its book matched veneer is high quality. One minor aspect that is a bit disappointing -- the feet are just cheap metal grommets which I think are unfitting for a $3K speaker. I'm not sure if Klipsch felt spikes were unnecessary based on the speaker's design? And yes, it's a bit weird that these speakers are designed to sit on the floor and angle up.  As a result, the entire soundstage is lower than my stand mounted monitors. Also, be forewarned that the cabinet doesn't have that "dead to the knock" sound that I'm used to with some of my speakers but again, I'm not sure the (ported) design requires it. Anyhow, I just wanted to share my experience with these speakers which was so vastly different (and satisfying) from what I was expecting. 
lofgren
My Heresy IIIs sit on slightly squashed (I rotate ’em from time to time to spread the squash, so to speak) Vibrapods with stick-on felt on the floor side so they can easily slide around on my wood floors for positioning. I sit 8 or 9 feet away and the tilt is fine for me with an excellently positioned soundstage (surprisingly, since I’ve always been an "ear level" tweaker with the many other speakers I’ve owned) image in the proper area up and in front of my earballs. I actually tried stands with the risers removed and thought they just sounded wrong (even with my 2 REL subs) as clearly they’re designed for the floor tilt presentation...put ’em back and much prefer them that way. Used an Isotek test CD and there’s a track where the sound goes around behind you...worked like a charm.
Once a rumor starts on these boards, it seems to never die. "Horn speakers are very colored and sound hollow -like cupped hands." and "Thiel speakers are very bright" or "B&W diamond tweeters are bright and fatiguing". I found all of these to be untrue. Former owner: Klipsch La Scala II and Thiel 2.4SE. And current owner of B&W 804D3. Trust your own ears.
It doesn't hurt to experiment with raising the speakers up, but, when properly set up, the image seems to float above these speakers even though the drivers are fairly close to the ground.  Raising the woofer up and away from the floor increases the likelihood of a midbass suckout from the reflection of the sound off the floor cancelling the sound radiating directly from the driver (longer path length of the reflection causing it to be out of phase with respect to the direct sound).  If you want more information on this, look up the "Allison Effect."
I need to get to the local dealer and hear the IVs. Wondering if they sound different from IIIs other than extended ported bass.
My brother owns these and I can tell you for sure ,they sound decent in stock form just unscrew the back panel ,the upgrade 
we give the speaker transforms them ,the drivers are good ,but the connectors are cheap,and the Xover very low grade all made in China which is shocking for a $2k monitor. The olderKlipsch Always mounted the Xover on a plywood board ,not it is direct behind the woofer stacked on levels which makes the Xover upgrade much more difficult . That being said upgrading the Xover substantially improves the imaging and tonal realism. Something
to think about.