People is what they is for the most part, not likely to change.
"Never Wrestle with a Pig. You Both Get Dirty and the Pig Likes It"
"Never Wrestle with a Pig. You Both Get Dirty and the Pig Likes It"
Tubes?
I have Revel Salon 2 speakers. Sensitivity is about 85 db. and 4 ohms. They are power hungry speakers. Currently, I am driving them with McIntosh 601's and a McIntosh solid state preamp. I was look looking at a pair of McIntosh MC2301. They are tube amps rated at 300 watts into 2 - 8 ohm loads. I listen to all types of music (sometimes at very high levels). I never run out of power with the 601's, but I am very intrigued with tubes. This may be a misconception, but I remember some friends who played guitar saying, tube watts were louder than solid state? Perhaps this is not really true or not true regarding home stereo. Perhaps the best idea is to keep the 601's and get a good tube preamp? Thanks, Dave
- ...
- 74 posts total
here's a hybrid, MC901 mono: 300 wpc tubes for mids and highs, 300 wpc ss for woofers https://www.mcintoshlabs.com/products/amplifiers/MC901 |
I used to think that SETs had a magical quality with the right speakers. 8 hour listening sessions over a few days comparing SETs (300B single and parallel single ended), KT88 push pull and OTLs was a real learning experience. Speakers used were the DeVore O/96s and all I will say is that the SETs, while having a great midrange, came in dead last. The push pull amps sounded a bit fuzzy but were more linear and powerful. The only amp that had no drawbacks and won in every category were the OTLs. Because I cant find a high efficiency speaker that I like, lower powered tube amps are not an option. I am also having trouble finding a high impedance speaker that I like so OTLs are not yet an option. |
- 74 posts total