Speaker sensitivity vs SQ

@larryi,

You may wanna add Tannoy Canterbury Prestige GR speaker to your list of speakers that has exemplified themselves in achieving excellent tonal balance from a single driver.

The Canterbury’s sports a 15-inch dual concentric single chassis driver that incorporates two separate drive units, integrated into one. If you like, you can further read about the merits of dual concentric driver on Tannoy website. Here I wanted to express briefly, the frequency response from 15” driver is pretty flat throughout the entire audible frequency range. The Canterbury’s are excellent speakers capable of delivering very detailed, integrated, dynamic and warm sound. I also dig their traditional look with exquisite birch plywood cabinetry and champagne gold metalwork :-)

@tomic601 asked:  

"are you 3D printing the waveguide?"  

No. I looked into it and concluded that was impractical. The piece is 22" in diameter.

Duke

Aside from your personal likes dislikes in speakers the main advantage of Highly efficient speakers (> 95 dB  with 1 watt at 1 meter) is the greater dynamics that can be achieved.  Doubling the power of your amplifier will only give you a 3Db gain in SPL.  Lets take a look at the power requirements for a couple of speakers,  Setting the max SPL at 116 Db. the B&W 603 S2 is rated at 88.5 DB @ 1 watt input.  To produce 116 Db you will need a 1Kw amp.  My old Altec A7-500's are rated at 103 Db at 1 watt and can Produce 116 dB with a little over 16 watts.  To my ear this is why some speakers sound muted/sluggish on rim shots and other sounds that require fast response.
disclaimer the math is approximant but close. My personal system uses a set of speakers that are rated at 84dB at 1 watt and my power amp is rated at 1Kw RMS and tests to 1.1 Kw/channel both channels operating..   I can only say that switching from a MC2100 to the larger amp was like cleaning a dirty windshild and bass is tight as a drum pun intended.

I have yet to hear the OB speakers Danny Richie offers in his various GR Research kits, but they are pretty darn sensitive (mid-to-high 90's) and are reportedly very transparent, natural at timbre reproduction, and dynamic as well. As soon as social interaction is again possible, I plan on inviting myself over to the Portland home of the Audiogoner who owns the NX-Otica (I think), which he pairs with the Rythmik/GRR OB/Dipole Sub, which I too built.

lalitk,

I've heard the Canterbury and other coaxial Tannoy speakers and liked what I heard.  I just did not consider them in the discussion because they I did not consider them to be a single, full-range driver.  But, they are certainly great sounding examples of fairly highly efficient speakers that are easy to drive and can be run with low-powered amps.  I also agree they are quite nice to look at too.

I have a friend who is now in the process of building a system using the coaxial Altec 604 drivers from Great Plains Audio.  At one point, he considered an Onken cabinet, but, the available designs for this driver specify a 360 liter cabinet (one and half times the size of the Canterbury's Onken cabinet) and this was too large to be practical.  Too bad, I like the sound of Onken bass reflex speakers.