This site sells 132-kHz units -
CleanerVinyl Ultrasonic Record Cleaning. I know of at least person that uses their 40-kHz unit for pre-clean and then the 132-kHz unit for final clean. The individual has some physical limitations and this setup can pretty much clean anything.
1. Step 1 - 40kHz; use the Tergitol 15-S-9 at 0.05 to 0.1%; for your 6000 mL tank that is 3-6 mL (no benefit for >6 mL/0.1%). For his 6000 mL tank he just adds 60-70 drops. This concentration will develop a wetting solution and micelles that will provided detergency. When he removes the record - gives it a few seconds to drain into the tank. As a wetting solution it will drain very quickly - this will minimize carry-over to the 132kHz tank.
2. Step 2 - 132kHz; use the Tergitol 15-S-9 at 0.01%; for his 6000 mL tanks that is 0.6 mL - to keep it simple just use 10 drops. For the 132kHz this is the final polish and the amount of Tergitol 15-S-9 is only to achieve a 'wetting' solution. You want the US and low surface tension fluid to do the work - he should not need detergency at this level.
1. Step 1 - 40kHz; use the Tergitol 15-S-9 at 0.05 to 0.1%; for your 6000 mL tank that is 3-6 mL (no benefit for >6 mL/0.1%). For his 6000 mL tank he just adds 60-70 drops. This concentration will develop a wetting solution and micelles that will provided detergency. When he removes the record - gives it a few seconds to drain into the tank. As a wetting solution it will drain very quickly - this will minimize carry-over to the 132kHz tank.
2. Step 2 - 132kHz; use the Tergitol 15-S-9 at 0.01%; for his 6000 mL tanks that is 0.6 mL - to keep it simple just use 10 drops. For the 132kHz this is the final polish and the amount of Tergitol 15-S-9 is only to achieve a 'wetting' solution. You want the US and low surface tension fluid to do the work - he should not need detergency at this level.