One Cord To Rule Them All

MC and TJ:
600 watts I think is about correct as the P10 says the system is drawing 420 watts at idle (my 2 mono amps idle at 150 watts each). Now the P10 runs at about 66% efficiency so 420/.66 = 636 watts. If it goes from the wall into the P10, then yes it is passing the watts through the cable. Watts are Voltage x Current and about 600 watts are passing through the power cord while my system is running.

I was thinking of going to a solid core cable instead of stranded, but keeping within my budget... any chance?

@koestner 

I highly recommend VH Audio Flavor4 cord for $335 / delivered. I doubt you can do any better than this cord in your price range. 
https://www.vhaudio.com/flavor4.html

Help out someone who has never owned a power regenerator.  After reading what tablejockey wrote, it makes me wonder that as long as the power cord can deliver enough electricity to the regenerator, what does it matter what power cord you use?  I only ask because as PSAudio states, the unit "regenerates new, pure, safe, and unrestricted AC power".  So as long as the unit isn't being starved, then, within reason, what does it matter what happens before the electricity reaches the unit prior to being regenerated?

Paul says it WILL improve his PowerPlants on both ends. Look at the PS Audio Forums and you will probably want a Belden BAV 10 guage.
$170
https://www.iconoclastcable.com/bav/index.htm

Jetter, I felt the same way, but PS Audio even says a better power cable will sound better?? So my quest for a better cable has started. I also just discovered that Audio Envy has a Mega 3 Power Cable that uses more conductor material for higher current applications. A 5 foot cord is $306, so still within my budget (if I can ignore the $6). Has anyone got an opinion on this Mega cord?