Gryphon Mephisto


Here is an update with my Gryphon Mephisto: Connectivity was directly from my EMM LABS DV2. After some time I found it too edgy and forward. Lowering the gain on the DV2 helped, but still not to my liking. Couldn't find a Pandora anywhere. I called John at Audio Salon, (Great guy to Do business with) never had any dealings with him before. He had a Zena. I figured the Zena would give me a pretty good sonic presentation as to what to expect from the Pandora. Sure enough I knew in the first 5 minutes. Fantastic presentation, its a very good preamp. Separate PS with the Pandora, dual AC power, will only make things better. I ordered a new Pandora. Gryphon is making one. If anyone is interested in a Zena PM me. Only thing is the Pandora will take 2-3 weeks. I'll update this after the Pandora arrives. My room is huge 30 X 26 X 26H. Big A-Frame. This creates denominators that are not typical. 
jakesnak
@bob540  Many times I wish I never got in the audio equipment upgrade merry go round.  You're fine not getting involved at the 6-digit level for a system.  It's like Sheryl Crow's lyric in her song, 'Soak up the Song'.  
I don't have digital
I don't have diddly squat
It's not having what you want
It's wanting what you've got
 
@jakesnake  You mention that 'Gryphon made it very clear as to place the power supply separate from the Pandora Pre. Bigger sound stage and more separation.

When Gryphon says to place the Pandora power supply separate from the Pandora pre-amp, did they mean to place the pre on a different dedicated electrical circuit than the power supply?  

Thanks,
Brian ...
@cycle2: Brian, What Gryphon told me was physically separate the power supply from the pre, separate shelf. I always attempt to place my gear on individual circuits. I will not be able to do this when the Pandora/Power Supply Arrives. If the Pandora and Power Supply are on the same circuit I doubt if that diminishes anything. Hope this helps...John
“When Gryphon says to place the Pandora power supply separate from the Pandora pre-amp, did they mean to place the pre on a different dedicated electrical circuit than the power supply?

What? How is this even possible when the preamp chassis lacks IEC and designed to receive power through DC umbilical cords from its own custom designed separate power supply?

A query like this makes one wonder if they actually own the component 😊
Lalitk, is correct. I should have phrased my response with a little more thought. Actually a lot more thought! I thought what cycle2 meant was splitting the AC power from the PS to separate circuits. What I should have stated is I doubt if running the power supply from the same circuit would diminish anything.  I run the Mephisto from 2 separate circuits. As Lalitk said, it would be difficult to run power from the Pandora Pre as there is NO IEC! Sorry for the confusing post...John