Amps In Wall Or Conditioner?
If power supplies cleaned out all incoming AC then they'd be pretty much standardized by now, which none are. No two make are alike. Most are built to a price point or with the belief by the designer that they are only intended to do one thing and that by going by the book, the problem is solved. That has never been the case. All the best, Nonoise |
hickamore OP255 posts10-25-2021 6:59pmbuilder3, yes I will experiment within the limit of available possibilities at any particular time. Glad to hear you won't be altering the time/space continuum. Safety first. |
do not put the dedicated line (s) on separate legs of the main panel. Rather get motors on the opposite leg e.g. freezer, fridge, AC, furnace. When you spec the wire size, get the max the electrician can correctly terminate. The marginal cost to upsize to max is normally pretty low. Next get any switch mode aka wall wart power supply items on the PC, preferably on dedicated line. Depending on the quality level of your DAC it may need go on PC “ dirty “ circuit. Listen is the test. Cheap DACs lacking a Faraday cage normally find themselves on the dirty side. then listen and experiment w remaining analog gear. |
Thanks, all. As planned, stereo amp stays in the wall. Conditioner goes in the wall. DAC, streamers, CD go in the conditioner. Analog sources can probably go anywhere(?). Preamp and sub amp are the floaters. Then we listen and fiddle and await the electrician, more like Godot than the Iceman. Sorry for dumb question; my first tryout with an actual conditioner vs. Furman 8 + Quattro 4. |
