Cost break down of hifi system

minorl Thanks for the advice, I think that’s the best advice I have been given.

yes @minorl  presented a good case.

First, listen to a lot of systems and think about what you are hearing.

1) Speakers first, at least 90dB; high sensitivity will give you a wider and generally less expensive choice of amps and preamps.

2) Get tubes in the line somewhere, preamp or amp. (1) will help to do that, and right now you can get better sound for less with tubes right (in the future who knows).

3) Then DAC, essential, but don't over-spend, because you will want to change it up in the future. Check out the DAC chips in the gear you are considering buying; this is not the only thing that is important, but it's a good place to start to make choices. Used stuff is a good way to go.

4) Then preamp, read all the reviews and understand them. It does not have to be expensive but it has to sound right ot you. Also, separates will let you improve your system in the future in stages and at less cost.. Sorry, but you will not get it right the first time out.

5) Then amp and source.

6) After you have a working system you can do room treatment. Just hang rockwool where needed and experiment--very cheap. Then later make it look nice with panels, etc. and kiss the wife.

7) Finally, now you can think about cables; not before. They matter, but not until you have the best system you can afford in place, and you can listen long and hard to it. The choice partly depends on your choice of components.

8) Listen hard and deeply over a long time until you can really hear into the music. At that time you will probably change something in the system. Do not kick yourself. Take your time and enjoy the road to excellence.  

@shtr74sims I do feel like the Cardas cyngus is a good place to start for cables to, I can get them at a decent discount. It would be around 2600 on cyngus cables which is not to bad...

If it helps to share, I was fortunate to do some early factory beta-eval testing with Cardas on Cygnus, full loom Interconnects too. I was comparing old vs. new designs on different SS and Tube amplifier applications.  

As a 30+ year Cardas owner I’ve enjoyed the different designs. Cygnus will do fine for you particularly with your pre/amp setup. Not having to step up to Clear or Beyond, this is a safe start. You can resale Cygnus later no problem. If you must, just go up on the ICs between your DAC to your preamp. Run the rest with Cygnus, you’ll be fine. All-Cygnus 4-conductor design will be a safe bet.

A popular combo with your pre / amp setup, and good w/your speakers imo. The newer designs are more clear than older Cardas golden designs. You won’t need to second guess later if you proceed.

@4krowme "Aside from that, using acoustic panels are another thing that I decide to use or not. This has way more to do with the trouble of putting the panels in place and then taking them down before the wife gets home"

Now that, is funny!!! 🤣.  

Pick up a pair of these speaker cables to compare to others you audition.

DeKay