To dip your toe into Vinyl, to see IF you will stick with it:
This TT is my recommendation:
It has a built-in optional phono eq stage, so it can go into any line level input.
....................
As soon as you decide vinyl is pretty good, then you buy a cartridge with advanced stylus, improved imaging via wide channel separation 28db and tighter center balance 1db
You will hear a noticeable improvement
now you have two headshells with two cartridges.
Hooked? Then better TT, better Tonearm (with removable headshell), you can start with the VM540ML cartridge you bought, and move up from there.
Newer TT, more than likely now need a separate Phono Stage. Move up to MC cartridge, now need either a SUT (step-up-transformer) or a phono stage that works for both MM and MC cartridges.
Bit by Bit, if hooked, if moving up, you will get lots of advice/help here.
Point is, this AT120 TT is an easy and inexpensive way to determine IF you will stick with Vinyl.
If vinyl is not for you, then you haven't spent too much money to find that out.