Thoughts On Turntable Clamps And Weights

We know, but weights and clamps typically contact only the label. What they otherwise do is push the LP into closer contact with the platter or the mat, and that’s where ideally you want delrin or graphite.

True, but under the label is vinyl. That too is important, or so I suspect.

The flywheel effect attained by a weighty clamp might be worth the price of admission by further stabilizing rotational speed.

The coolest record clamp I ever saw on Youtube was vacuum with a flexible seal on the perimeter which pulled the record completely flat without the use of weights.

Bergman Galder Vacuum Clamp

This leaves out a crucial part of what happens when one placing a floppy disc of vinyl on a surface. There will be a cavity below that shift from center to front of the disc when adding a clamp.

Tap the disc with your nail and you clearly hear the hollow space below. Thinking any cartridge will not "hear" and reproduce this cavity is denying the acoustics of that environment.

Me thinks, a vacuum is the only way to couple disc and platter into one acoustic unit. Tap that sandwich and you will only hear the sound of your nail striking the record, nothing more.

I would not consider any turntable, in any price range without a proper vacuum hold.

It is as basic an issue as firm speed stability and lack of bearing noise.

My VPI has a periphery clamp and weight.....works very well, but it was designed for its use.