Agree that the more you can take WiFi out the equation, the better. WiFi can be a tricky to setup and troubleshoot in general. I can understand not wanting to run a 45 or 50ft Ethernet if it can be seen and you don’t like the aesthetics of that, but if you can run a cable, Ethernet is rated to over 300ft from a networking perspective and a good cable will likely give you better and more reliable performance.
For wi-fi streamers--a discovery to increase wi-fi strength
It was previously reported in a thread here that putting a piece of aluminum foil behind a router can increase wi-fi signal strength, and I verified this with the Bluesound app for my Bluesound Node streamer.
Today, because I was having some internet speed problems, I experimented with the orientation of the base router of my mesh network, and found this made a significant difference in the wi-fi signal strength, going from "Good" to "Excellent."
Then for the first time I added a piece of aluminum foil behind the extension router unit nearest my streamer, and that further improved the wi-fi signal strength from -48 dBm to -43 dBm, the best reading I've ever gotten with this mesh network.
Given that an "Excellent" reading is considered by Bluesound to be necessary for streaming hi-res files, this is an important consideration for those doing wi-fi streaming. And perhaps some members who have been disappointed with wi-fi streaming didn't have adequate wi-fi signal strength. I suspect the audible differences (at least with the Node streamer) lie in problems with dropouts and buffering rather than sound quality, but I'm not certain of that or whether that would be the case for all streamers.
- ...
- 21 posts total
| Post removed |
Many years ago I dived into "network playing" (streaming) with a Bluesound Node. I quickly abandoned wifi as soix’s solution (mesh router) was an incomparably better connection. When I moved the Node outside I grabbed another mesh node on eBay for it. Out in the shed the Bluesound could hardly connect via wifi, much worse than my $100 phone. Try a tin foil hat. |
@erik_squires I have not found a wifi analyzer that actually works. Do you have a link or name? Thanks! |
- 21 posts total