Cost Incurred to Achieve a Vinyl LP Replay


As a Long Term user of the Vinyl LP as a Source, as well as being one who has ventured into discovering and experiencing how fellow enthusiasts have developed their own interest in Vinyl replays. I have got to a place where limited to my experiences only, most I have encountered have over many years have been constrained in their budgets for the Ancillaries required to replay a Vinyl LP.

A few have exceeded the approx' £30K mark for a TT > Tonearm > Cartridge, and fewer from this selection are using dedicated Electronics with a Value of more than £10K to support the Source. 

My most typical experiences are of Ancillaries and Electronics used to support a Vinyl Replay with a combined cost of between approx' £6K - 16K.

I have been demo'd through being at commercial events, Ancillaries and Electronics that far exceed the above Values, but as these demo's are not from a familiar system and have been quite some time in the past these experiences have not been considered as being of importance or contributing to shaping how my present methods are I place to replay a Vinyl LP. 

What I have also become quite aware of, as a result of sharing and receiving accounts of Past Experiences, is that 'dye in the wool' Vinyl Replay Enthusiasts have been active at different levels in their trying out or introducing new ancillaries to get to a place where they are believing that most contentment can be found for their own unique preferences for a produced sonic.

My own endeavours has been to remain with a Particular ancillary and look to have it overhauled, where a modern approach is used to produce a end product that has materials and electronics selected and utilised to transform the ancillary into something that is noticeably different for the better over the original. As such methods are Bespoke, it is difficult to have the methods understood by a onlooker.

My experiences shared have introduced myself to like minded individuals in the flesh and through Global Forum communications. 

I do belive adopted methods to produce Bespoke ancillaries are capable of producing performance that will be more aligned to ancillaries costing much more if using a Branded Item is the guideline, as a selection of materials and adopted methods for these materials can be found in the more recent marketed products. . 

For myself Vinyl Replay is a method to supply a form of entertainment The use of ancillaries to create this entertainment is a must. The learning that is to be attained as a result of using the Ancillaries creates what is more aligned with being a hobby.

The question that is a vaguery, is how much monies, from a range of approx', £3K ($3.2K) - (£350K ($400K) does one feel justified in spending/believes needs to be spent, to satisfy their hobby (lessons learned) needs and need to be entertained (enjoyment of listening to music) .

It is without doubt, there will be 

 fewer reading this, that will be experienced with and able to comment on the 50K and upward ancillaries, it would be good to see what is to be shared. 

 

128x128pindac

I asked Chat GPT to summarize the OP in 150 words. How close did it get?

CHAT GPT: "The author, a long-term user of Vinyl LPs, reflects on the diverse budget constraints among enthusiasts for ancillaries (turntables, tonearms, cartridges) in Vinyl replay setups. While some invest over £30K in their systems, the author's typical range is £6K-16K. Noting encounters with higher-end setups at commercial events, the author emphasizes the challenge of integrating diverse ancillaries into a cohesive system. Personal endeavors involve customizing and overhauling particular ancillaries, aiming for a unique and improved sonic experience. The author believes bespoke methods can rival more expensive branded items in performance. Vinyl replay, seen as entertainment, involves a learning process akin to a hobby. The author poses the vague question of justifiable spending—ranging from £3K to £350K—to satisfy hobby and entertainment needs. The author invites those with experience in higher-budget ancillaries to share insights."

For me, and not going too crazy from a price point perspective:

Cleaning system (Kirmuss, etc.)

Turntable

Cartridge

Tonearm lifter (Little Fwend, etc.)

Phono stage

SweetVinyl Sugar Cube

Likely $10-12k all in, with no obvious regrets. Be sure to budget adequately for a quality cleaning system; if you play vintage LPs, I’d look into ultrasonic systems. I mostly play more recent pressings and find the Oki Noki vacuum system perfect for my own needs.

With the price of some modern gear, I think most of us here could deplete our bank accounts completely. The idea is to not to. It's like looking at the beautiful woman across the room when you have an attractive wife sitting next to you. You have to know that the beautiful woman is going to cost you a lot of money and heartache. I hope you can appreciate the analogy. 

@hilde45 I have access to a similar Tool for editing.

It is ideal for a day to day tidy of something being put together in the workplace.

I am not in the workplace when discussing and sharing on a forum, hence I will write exactly as I please.

You know who I am, you can always stand down and keep stum, but I sense that will be way too much of a challenge for you. 

The editing Tool is way way, it looks like the software needs more work.

The editing tool suggests the wring intention for the nature of the Thread in some of the description it has presented. The tools content presents in a way that suggests only certain types of individual are invited to share their experiences, where as this thread encourages all to share their experiences. 

Maybe the individual responsible for the input of the information to be edited, manipulated the input for the editing tool until their own preferred edit appeared for posting??   

@pindac It seems that you’re taking offense. I’m actually just curious about the competency of ChatGPT. Since you took the trouble to write the OP and others have been trying to parse it, it seemed that this would be an easy thing to do.

Sorry I misjudged the situation and have wound up inspiring your ire. Let me apologize to you, then, and wish you a happy holiday and peace.