One DAC to Rule it All

I had been doing it the "old fashioned" way until I got the DBX. I found a great improvement upon sending only 100 Hz and up (48db/oct.) to my main speakers (Reference 3A NEFES II), and just below 100 Hz to the subs (same slope). I wasn't expecting such an improvement in detail, but I must confess it was there. I'm just wondering about the double digital conversion. I truly believe the OKTO to be the better DAC, but it won't do the crossover and other things like parametric EQ. So, it's either both, or just the DBX doing it all.

What is your budget ? My brother has the new DCS Rossini $35k 

land incredible ,but he says he may want their master oversampler 

which mo way I would spend more then a nice car on digital or anything 

my end game dac-preamp is the T+A 200 dac it is only $7200 minus discounts 

that’s one I am saving for ,and a new car. My wife thinks $1k power cord is nuts .

I have been comparing a bunch in our audio get together for digital 

the AQ Tornado -sourse is Very good and just brings the best out of your digital .

In my 2 nd system the Eversolo DMP-A8 is a excellent dac -streamer or under $2k built with judt top quality brand parts and latest AKM 4499EX dacs and matching receiver ,and gen 3 Xmas , the interface app is Excellent ,and is even a SS server up to 4 T , imo Best Buy out there. and with any decent upgrade power cord very good sounding , Anthony Perrotta Consultants , He. gives very good package deals $$ and great service.I will give a rundown on it after full runin ,my friend owns the 6 master edition , which is good but different chipset using Sabre , the top A8 has a true active resistive ladder to relay preamp ,not a digital preamp ishocking all thst for under $2k ,I have a separate freya+ pre with good NOS tubes  which is better but on its own no loss of resolution ,Anyway I just thought I would mention it.

Your setup is pretty unique @koestner

I wouldn’t expect many to have experience with this.
I think the biggest contributor to your listening experience is the DBX unit.
Ever entertained trying a good analog crossover like the Marchand Electronics?

Not saying it wouldn’t influence the sound at all, but pretty sure it would influence it less. Then you can actually get a nice dac and hear an improvement.

I use the DBX DriveRack PA2 to control my subs.  In my opinion you are doing it wrong.  Take one output from your preamp and send it full range to your amp.  Take the second output from the preamp and send that to the DBX and use the software on that to set the crossover and levels etc. etc..  Run the subs with the crossover set to the maximum and set the level to approximate what you want but fine tune with the DBX.  The absolute last thing you want to do is have the DBX in between your preamp and your power amp.  The cheap DA/AD converters in it will destroy the quality of your sound but it is completely irrelevant for the subs.  If you don't have two outputs from your preamp I suppose you could always get a y-splitter.

You system is so convoluted that I'm not sure upgrading a DAC is going to make a difference. When it comes to the audio chain, simpler usually is better. I've heard this proven more than once.