2. cables
  3. 192249-192661

SL-1200 G Power cable

On hooking up my new Technics SL-1200G I started out plugging in a nice new DHLabs 1-meter power cable and then found out it wasn’t getting any juice. I guessed contact wasn’t being made with that awkward plug port so I just plugged in the stock cord and all was well. The smaller plug did the trick and all seems great, but is it worth fooling with this further for just a TT? It’s plugged into a Niagara 1200 so how much do I need to worry about radiation to or from this cable?  It’s all about the stupid plug size.  Sorry about this stupid question!

128x128howardlee
jasonbourne71's avatar
jasonbourne71
1,197 posts
 

The stock cord is fine! No need to obsess over a TT's power cord. 

howardlee's avatar
howardlee OP
58 posts
 

Thanks! Confirming my thoughts as well.

carlsbad2's avatar
carlsbad2
1,623 posts
 

TT uses very little current and does't have large current need changes like an amp.  Your amp will need a heavy power cord and should not be restricted by the Niagra 1200.  TT is fine as is.

stereo5's avatar
stereo5
6,401 posts
 

I had the same problem with my SL1200G. I had a short Shunyata IEC extender which allowed me to plug it into the turntable connector and used a Shunyata Copperhead power cord for the power.  I had both in my cable drawer so I figured what the heck.  I have had it that way since 2018. 

howardlee's avatar
howardlee OP
58 posts
 

I felt like an idiot posting this thing in the first place, but the arrangement of the power & other connectors should have been changed years ago.  It wouldn't take much to knock that ground wire off, and for any of these hookups it's easier just to turn the thing on its side.  No one wants to do that. 

More to discover