Teres, redpoint or galibier turntable

Hi Paul
I don't disagree with that comment on Arthur's blog.

What I'm trying to say is that any recommendation has to be seen in the light of the system's context, especially in the case of TT>Arm>Cart>Phono and Amp>Speaker. Anyone recommending one element of a system should always list the rest of the system, else it is hard to give credit to that comment.

We often have questions raised like which part is more important, but every part of the chain is important and the music you hear at the end is the result of the sum of the parts. So in the context of an analog playback system, the music is only as good as what the weakest link can reproduce. If you start with 100% at the stylus, and the tonearm resonances removes 10%, you cannot get back that 10% down the chain no matter how hard you try.

Hi Cmk. I am not eluding that you were disagreeing with Arthur’s blog. English is not my first language and sometimes my postings do not reflect the meaning I intended. My apologies.

I was commenting on the fact that coincidentally both you and Arthur share the same 'unpopular' view, and you both posted on the same thread. The board seems to be frequented by what I can only describe as the audiophile equivalent of 'groupies' for some marques and technologies.

Consequently objective views and opinions are few and far between, and sadly, many times said objective opinions are not tolerated well.

I agree that one should approach a system as a whole, and that it is very likely to find a component that works well in one system, to be somewhat disappointing in another. Recommendations made w/o considering the environment are somewhat risky.

Regards
Paul

Dan, my apologies, I should have mentioned my concerns were based mostly on two Teres owner’s posting on VA. The one owner has subsequently sold his Teres and bought a VPI. The post was not aimed at you.

The said gentlemen had, to my knowledge, no preconceived negative bias toward unipivots/low compliance carts, yet had experienced problems. Since I owned and used (quite successfully I might add) the same arm and cartridge combo one of them had on my VPI, the problem could only be a result of bad setup or an incompatibility with table itself. I have no reason to suspect either gent’s ability to achieve a good arm/cart setup.

You have somewhat consistently, demonstrated a high degree of negative bias towards certain technologies, unipivots being one. Some people just don’t like certain things and I most certainly have no issue with that. I therefore did not consider your personal bias as a reflection of some characteristic of your turntable or cartridge (and still do not).

Regards
Paul

No worries, Pauly. My last post should have had a smiley attached since I did mean that as a poke at we who own these subject tables. Myself perhaps being the oddest of the bunch.

As for uni-pivots, I don't really mean to come across as having a completely negative opinion of them. Sorry if I came across that way. I did find the well regarded uni-pivot that I used for a while to have certain limitations under some circumstances. However, under other circumstances I found that uni-pivot very satisfying. Same with suspended tables. It's all about the right combinations.

for the most part all three tables seem to please there respective owners.i have only heard a teres as a friend owns one.it was good enough that i entertained purchasing one myself until a great deal on a vpi swung me that way.i have enjoyed mr.salvatore's blog for quite some time,purchased equipment from him and sought his opinion a few times.when he feels it is time to demote a piece of equipment he does so,regardless of manufacturer.IMO,of course.