2. analog
  3. 1226841663

Steam Cleaning - RCM or not?

I posted a couple of times yesterday about this over at AudioKarma, but thought I would ask here as well since Audiogon seems to be at the center of the steam cleaning information.

I tried steaming in earnest a few nights ago; I did an LP I've had for years that had had some minor mold on it, which I removed a long time ago with my RCM, but the spore pattern remained. It was gone in a minute with the steam, which I somewhat expected. What I didn't expect was how lifelike this 3rd pressing, orange-label Dynaflex LP suddenly sounded. Amazing!

My question is this; I'm really drawn to the idea of not using my 20+ year old RCM at all because of the noise, which I'm getting tired of hearing after all these years. I'd really like to be just steaming, lint-brushing with my home-made fluid I've been using a while, steaming again and wiping with a couple of microfiber cloths. That seems to work very well, except that I seem to be getting some gunk on my stylus now and again which may be lint from the cloths.

Is this a concern? I actually did this routine a couple of times to one side of an LP and then did the same thing but RCM'd and not microfibered the other side, and I would swear the non-RCM's side sounded slightly more real in each case. Sonically I'm completely okay with the cloths only, but am a little concerned about possible residue and whatever that is showing up on my needle—although my ears are telling me this is the way to go. Anybody else come to this conclusion?
vanmeter
grimsbylad
34 posts
 
I think this depends on how you use your RCM.I have been cleaning albums for 40 years and have tried just about everything. I have found that using a RCM in conjunction with disc doctor products and a good regim will get a record as clean as possible.
thorman
1,262 posts
 
I Tell ya! I am totally amazed at how well my little Shark Steam cleaner works and even though I built my own RCMachine I have no intention of using it ..Now its a conversation piece.I am that happy with the Steam cleaning..I set up a jig in my basement and can clean 10 records ( including a rinse cycle ) in less 15 or 20 minutes and now albums only needs periodic touch up ( light particles ) with a Discwasher or dry brush...If you have the bucks I am sure its great to have a $2000 RCM but if you are retired ( like me ) or can't afford a machine.For less than $50 you can clean to your hearts content....Very simple to use too.......
vanmeter OP
33 posts
 
Well, I had a hearing test about two years ago and was told I have a huge, huge, hole in the octave around 2k...I don't notice it except sometimes life just sounds like I am in a tunnel, but I suspect my brain compensates most of the time. My top end is fine. But they said the loss was likely from being around loud noise...I was a DJ for years wearing headphones, and then had a recording studio, on top of playing in bands, and am now paying for it. I really am more concerned about not standing a foot away from my (very loud) RCM for even a minute or less. So I'm happy that the steam seems to work well without the RCM, and records even seem to sound better to me without the vacuum. Of course, from a man admitting hearing loss, but I do think I'm not missing anything.

Oh, and I'm 37 - take care of your hearing!!!
sonofjim
557 posts
 
I use steam in conjunction with the 16.5 and I feel it offers a couple of advantages. I think with the platter spinning, I'm distributing the steam more evenly which also distributes heat more evenly and may reduce the risk of warping. I also believe that vacuuming off the residue is synergistic with the steaming process. Wiping the fluid off with anything seems to be a risk for pushing some of this gunk back into the grooves to me. I have no doubt that steaming without a RCM works fine but I think if you already have one it's more convenient and probably more effective to use it. I plug my ears when I turn my vacuum on. The duration of the noise is not long enough to be a likely cause of hearing damage anyway. It's not just decibel level, it's decibel level and duration that lead to damage. I come from a long line of farmers. Even low level engine noise all day long can be devastating. You're RCM for a few seconds at a time with your ears plugged, no problem.
btstrg
185 posts
 
What is the procedure for steam cleaning a record?? How far to you hold the steamer from the LP ?? Can someone either post or email me the procedure for steam cleaning, What steam cleaning I should get and were can I get one?
Thanks
More to discover