New member w a Cleaning Question

Seeing Doug's comments reminded me of something I learned earlier from him and that is use of a bit of Mr Clean Magic Eraser for cleaning the stylus. It works very well and avoids the hazard of applying fluids to the needle. Clean your records. Clean your stylus.

I read this thread while using my DIY RCM, and find the following point so important that I'd reiterate it - the quality of extraction during the cleaning process is (probably) even more important than the solvent used for cleaning.

First, until I built my own RCM (using transparent 4mm tubing ultimately terminated by a ShopVac), I didn't realize exactly how much liquid is held in those grooved (even when the LP appears dry).

Second, I recall hearing (reading?) that after using a manual (no vacuum) cleaning process, it takes a couple of plays of the LP to get it to sound the best. Why would that be? Probably because you've dissolved a bunch of gunk, and combined with the evaporated solvent residue, it's settled into the recesses of the groove waiting to be dug-out by your stylus. Now *that's* an expensive record cleaning tool.

Just like Doug, I learned the hard way. First I simply dusted my new (used) records with a Swiffer duster. Then I invested in the Disc Doc solution and brushes - I thought I was in the big-league now - and washed my LPs in the sink. Then a spent a whopping $1.92 (or something like that) and cut a slit in a ShopVac hose extender and wrapped it in velvet to vacuum my records. Now *this* was a solid improvement.

Hold your hat - this is where things get expensive. I'm still using those DiscDoc brushes, but now I'm using the MOFI Plus cleaner. Also, I built a RCM out of an old turntable, a mason jar, 2 diameters of flexible hose, and a bit of Disc Doc replacement pad to keep the vacuum tip off my LP. Imagine a VPI / Loricraft hybrid. My total investment in this RCM was probably $50 (not including the ShopVac, Disc Doc brushes, or fluid). This was the greatest upgrade to my system to date. Why? It's all about the extraction process.

While a manual process (IMHO) is better than no process, if you have a ShopVac, you're a $2 piece of velvet away from getting a taste of what vacuum extraction can do.

You may also want to consider something like the Spin Clean. I've been using one for over a year, and while it may not provide a completely ideal cleaning method, it is much better than manual scrubbing alone and may be a good intermediate step for you before spending a lot of money on an RCM.

http://www.garage-a-records.com/spin.html

It's basically a tank that you fill with distilled water, and you add their "solution." This solution causes the dirt and grime to fall to the bottom of the tank so that the water above that cleans your records is clean. I use the Spin Clean as sort of a rinse after doing manual scrubbing and/or steaming. I would definitely recommend a Mobile Fidelity record brush for manual scrubbing, regardless of which cleansing method you choose (vacuum, spin clean, etc). I must say that using this combination, I've been able to achieve great results. Again, this is not the ideal solution because you must then either air dry your records or dry them manually with a towel (I always air dry, so as not to transfer dirt/dust from any other source). Of course when you air dry, you must wait a while for that to happen; this makes the RCM a quicker, more convenient method all around. I do plan on getting one myself some day; just how soon, I'm not sure.

I second the KAB EV-1. Been using it for over a year, and I think it represents an excellent cost/value ratio. I buy most of my vinyl used at shows and thrift shops, so cleaning is extremely important.

Also, do not underestimate the importance of the cartridge/stylus. I recently upgraded my Ortofon Super OM-10 to an OM-30. The improved stylus shape does a lot to minimize noise on records. I guess it just gets deeper into the grooves.

I use the AI products.
I had always been hand cleaning using Disc Dr brushes and micro-fiber towels with what I thought were V good results.
Recently, I purchased a VPI 16.5 here, and can hardly believe the difference. IME, vacuuming has made a significant improvement in the SQ of all my LP's, used, filthy dirty used and even new sealed.