2. analog
  3. 1245546626

TWL mod for Rega RB600 arm---help needed

I just got finished reading the years-old discussion thread concerning the fishing weight modification for OL and Rega arms for use with low-compliance cartridges, and I really want to do this but I'm at a loss as to how to go about it. I recently mounted a Denon 103r on my Rega RB600/Rega P25, so I have the perfect set-up that would presumably benefit from doing this mod. Today I bought some 1/2 oz. lead bullet fishing weights to try out, hoping I'd be able to simply blu-tack them on to the ends of the bearing housing bolts. This didn't work because the blu-tack isn't strong enough to hold the weights straight out and they gradually just sag downward. I thought about super-gluing them on but there doesn't seem to be enough surface area making contact for that to work. I read in the old discussion thread about guys drilling and reaming these things out so they would pressure fit over the bolts, but I haven't a clue how to go about doing this and don't really have the tools. So, I'm asking for any and all guidance---or, if one of you is able to fashion some weights for me to use, all the better, and I will pay you handsomely for the trouble! Thanks, Will Herrera
will_herrera
will_herrera OP
40 posts
 
Thanks for your reply Doug---so *that's* the paperclip VTF tweak, very cool---I guess I would have figured that out if I had read up some more on that tweak, which I have not so far, but apparently there's not much to it! I'll have do that tweak once I get this TWL mod implemented. peace, Will
jphii
485 posts
 
I matched the weights just because I was having fun in the shop that day. I bought one big weight, cut it in half, then drilled it so if fit tight on the bolts. As for not much to it, you're right. But it will shock you what each mod does.

Like Doug said, TWL is responsible for quite a few people getting back in to vinyl. I'm kinda back from a little absence again too. Just got my motor back from Chris a week ago and have been having a grand old time all over again.
will_herrera OP
40 posts
 
I have approx. 6,000 vinyl LPs and have been collecting for years, so having a high quality analog front end has become *very* important to me. I don't even have a digital front end source currently and frankly I don't miss having one, I have enough LPs to last me several lifetimes and I'm always acquiring more! good listening, Will
braab8
56 posts
 
thought I'd chime in here,I went thru the same problem when I implemented the TWL mod (btw where is Thom?) Doug (thanks Doug/Paul) helped me,reccomended I get some Super glue "gel" or the equivalent which should cinch that right up for you.

As regards the drilling if you have a variable speed drill just find a bit that's just smaller than the diameter of the fishing weight and with a pair of vise grips (and an EXTRA pair of hands) slowly drill-out a shallow hole ,be careful so that it's not too deep and then you should be done.

You will be pleasantly surprised with the results.

Jeff
More to discover