Dear T_bone, ...;^) .... what went unnoticed by Raul's sharp ears and eyes once again, is the fact that I listed a few good purely mechanical and physical arguments to go with the Ikeda silver litz (which I neither distribute nor make myself ...).
Big problem with the Ikeda silver litz is, that you don't get it cheap nor with considerable discount anywhere (if any fellow Audiogoner does know a cheap source ... I would be happy to learn).
In an inner tonearm wiring I look for the same as in every other component or part in the audio chain: - objective technical features and quality aside from all individual "sonic taste" or "liking in my set-up".
Real physical quality never gets out of date.
After all, a cable is a stranded wire.
The purity of it's metallurgy and the care in production are key to it's conductivity - at least to the last small percentage and with the lowest current or voltage (speaking of LOMCs ...). Pure silver has the highest standard AES conductivity - aside from supra conductors working with ultra low temp cooling.
Now add an insulation which is ultra flexible AND needs no strapping (which in most cases does some inevitable surface damage to the conductor) and you can hardly ask for more.
At least not regarding performance in the old school meaning of the term.
If however one need the tonearm wiring to "match", "blend" or "synergize" with the sound of a given "set-up", "cartridge/phono stage" or one's "idea" of how it "should sound" - then there are certainly many more options (about as many as audiophiles on this planet..) and a much wider selection in tonearm inner wiring.
Isn't audio great ?!
Cheers,
D.
Big problem with the Ikeda silver litz is, that you don't get it cheap nor with considerable discount anywhere (if any fellow Audiogoner does know a cheap source ... I would be happy to learn).
In an inner tonearm wiring I look for the same as in every other component or part in the audio chain: - objective technical features and quality aside from all individual "sonic taste" or "liking in my set-up".
Real physical quality never gets out of date.
After all, a cable is a stranded wire.
The purity of it's metallurgy and the care in production are key to it's conductivity - at least to the last small percentage and with the lowest current or voltage (speaking of LOMCs ...). Pure silver has the highest standard AES conductivity - aside from supra conductors working with ultra low temp cooling.
Now add an insulation which is ultra flexible AND needs no strapping (which in most cases does some inevitable surface damage to the conductor) and you can hardly ask for more.
At least not regarding performance in the old school meaning of the term.
If however one need the tonearm wiring to "match", "blend" or "synergize" with the sound of a given "set-up", "cartridge/phono stage" or one's "idea" of how it "should sound" - then there are certainly many more options (about as many as audiophiles on this planet..) and a much wider selection in tonearm inner wiring.
Isn't audio great ?!
Cheers,
D.