Dynavector 10x5 what is next?

I've had the 10x5, 20xl and 20xH the17D and the xx2mk II. The 20x is a marginal step up the 17d is huge as is the xx2. The 17d is so clean and clear sounding you will be amazed. In a way I like it better than the xx2 but I think the overall balance is better with the xx2 you can't go wrong with either. I think you will certainly like the 20x better than the 10x5 but if you are looking for a big jump go at least to the 17d.

Thanks
Do you guys think the ps audio will be ok.
I like separation on instruments and deep soundstage,
Listen to all kind of music.
Very happy with harbeth/luxman.

Input Sensitivity/Impedance: phono (MM), 2.5mV/47kΩ; phono (MC), 0.3mV/100Ω

You should be able to run the Dynavector 17D3 into the phono stage on your Luxman wih no problem. See the specificatin above from Luxman.

Without trying to be snippy, you could have looked this up in the Luxman manual. I can't tell you about the PS Audio because you have not provided the model information. If you have a question people are happy to help and it is great when you provide the pertinent information.

 
Luxman 550 AII
Continuous Output

20W + 20W/8Ω  Class A
40W + 40W/4Ω

Total Harmonic Distortion

0.006% or less

 (8Ω at 1KHz)

0.03% or less

(8Ω from 20~20KHz)

 

Input Sensitivity /impedance

.

.

.

Output Impedance

PHONO (MM)

: 2.5mV/47KΩ

PHONO (MC)

: 0.3mV/100Ω

LINE

: 180mV/42KΩ

BAL. LINE

: 180mV/79KΩ

MAIN-IN

: 450mV/51KΩ

57mOhm

Output Voltage

RECORDER: 180mV and PRE-OUT: 1V

Signal-to-Noise Ratio

PHONO (MM)

: Above 91dB

PHONO (MC)

: Above 75dB

LINE

: Above 106dB

 

Frequency Response

Tone Controls
Loudness Control

PHONO

: 20Hz~20,000Hz (±0.5dB)

LINE

: 20Hz~100,000Hz (+0dB ~ -3dB)

 

 

Bass ±10dB at 100Hz and Treble ±10dB at 10kHz

+7dB (±1dB) at 100Hz, +5dB (±1dB) at 10kHz

Controls

Power meter, headphones jack
Recording selector
Speaker selector (A and B), stereo / mono selector
Tone controls, balance and direct line
Sub sonic filter, loudness and line phase sensor
Remote control

Electric Power Consumption

190W (on, but without a signal), 1.3W (idle)

Dimensions

18.3” (W) × 7” (H) × 17.1” (D)

Weight

48.4 lbs

 

http://www.psaudio.com/products/audio/perfectwave-accessories/gcph-phono/