Another Cable Burn-in Question

In my experience, the high frequencies took the longest to settle in during cable burn in and 100 hours is actually not a very long break in period. I have a Speltz Anticable from my tuner to my preamp and Jim Speltz recommends a break in time of 500 hours. I find this very funny since there is a 30 day return policy if not satisfied!! Anyway, based on your post, I think your setup will sound great when the Signal Cable is broken in completely. In my CD setup, I switched from Nordost SPM to a Cardas Golden Reference interconnect. I just felt that the SPM which is a silver cable was a bit strident at the top end. However, it was great when used between other components. Enjoy the transformation!!

personally I'd say if the signal doesn't flow from the source and back to it, you are wasting your time spinning CDs without the peramp being on.

Cables don't know what source is what... use the cable box... or in another rig somewhere.

I've never understood why folks spin their expensive CDPs to burn in cables. A signal is a signal. Use the one which costs less to run... sat box, cable box, tuner... or in a secondary rig.

I've seem more break in time alloted to power cords than to ICs. I've never had ICs which took more than a couple weeks to run in either. 250hrs tops. Most are right on between 100 - 200.

The preamp DOES NOT have to be powered up. The voltage swings in a musical signal are generated solely by the source, and nothing is added (or sent back to the source) by the pre. AS long as the interconnect is hooked up to the load component, and music with heavy bass content(or a burn in disc) being played: the burn-in will be successful.

As Rodman states, the preamp doesn't need to be on, I've burned in tons of cables, capacitors this way. Get a real cheapo cd player for the burn in, $100 or less, good investment for further burns.