Class "A" solid state vs. Tube amp.?

Sparky57 is right on! But you CAN NOT tell someone this. It can only be experienced first hand. Some people would disagree and I'm talking experienced listeners. To me it is all too obvious but then again we all hear and listen differently. What is right for one is wrong for another. Then there are the system variables and impedence matters that would all but mandate a solid state amp. There is no absolute answer to your question. My answer to you is DON'T be tempted, and DON'T take a chance. If you are willing to spend the money you will for a Pass amp, I have heard and it is good indeed, for solid state, take the time to compare tubes and solid state. When you are finished comparing, you really won't need to ask anyone because the opinion that matters the most, yours, will hold the answer. My preference is obvious and am in full agreement with all the above.

As offensive as this may sound to many tube lovers out there I find the sound of well designed solid state to be categorically better than virtually any tube amp unless your system is seriously flawed and requires tube coloring to disguise such flaws. In my experience most tube amps break-up when forced to reproduce complex passages of either classical, rock or jazz (i.e. large dynamic peaks, many instruments overimposed, etc.). The only exception are the "over-engineered" megabuck tube amps with which I have little experience but which in any event do not seem to overperform well designed solid state gear. Although tube coloring via excessive mid-bass and rolled highs is in many cases a tempting cure for poor recordings or poorly designed systems I believe there is solid state equipment out there which vastly outperforms these intricate system/tube pairings. If you want names I suggest you look at Plinius, Krell, Levinson, Rowland, as well as some less pricey stuff from such as Marsh, GamuT and Sunfire.Of course the rest of the system needs to be up to par.

The only transistor stuff that approaches the musicality of tubes is Naim. For the most part, still prefer tubes but could and have lived with Naim .Had lot's of Class amps over the years as well, but not in the same league as tubes (or Naim).

ss is the way to go BIG TIME . thats only my thoughts , listen for your self. my system consists of all krell and apogee .

Chedo: What is the rest of your system? It's a hard call because tubes really do it for popular and traditional acoustic music and class "A" is great for classical, especially if you have the power/current reserves for musicical peaks. There are also many different tube sounds to choose from depending on the size of you room, the volumes at which you listen and your speakers. Stating your budget will also allow the experienced ones at this site to make real world suggestions (I am not a part of this group assuming that your budget is a plump one). My only long term experience is with push/pull tube and class "A" and "A/B" SS amps. I am learning about SET 2A3's, 300B's and other varients using EL34 etc. tubes. Getting good results from the latter group is very system dependent, and requires careful planning, but it is worth the effort from what I have heard so far. It's a good thing that I have a moderate budget or I would never be able to make up my mind, I mean you have to commit at some point.