Cable Supenders - Anyone Try Vibrapods?

I bought decorative glass blocks to lift my power strips. I gotta say I don't notice anything but it does look more organized. Somebody told me to have them at different heights so the digital is on its side and the amp lays flat. Can anybody explain the varying heights to me?

Sean - good tip. Will look into that. Still haven't heard a good reason for why ceramic is better, though. If the principle is to isolate the cables from the static electricity generated by the carpet and ceramic is good because it's a good insulator...then vibrapods or any "suspender" made of a non-conductive,polymeric material ought to be just as good. My guess would be that ceramic is used instead of rubber or other non-conductive polymers in industrial power application because it is more durable/resist atmospheric elements better. Then again, I'm not an electric engineer. Still..worth doing a bit more research on this. I'll report my findings back in a day or two...

I have tried putting Vibrapods under my cables (on carpet over wood floor) and could hear no difference so I removed them. They looked sort of tacky IMO. It seems to me that there are two considerations that need to be addressed, vibrations and static electricity.

I wouldn't think ceramic would have any way of reducing vibrations-- may even focus them? But Vibrapods should reduce or eliminate both? No? Cheers. Craig.

One poster here used inverted & shortened styrofoam cups as cable elevators. I've never tried it, but if it works for you then the cups could be spraypainted a dark color to hide them somewhat. For me this is one of those things I'd view quite skeptically, but then again I used to laugh at the thought of AC cabling affecting sound too, until I tried it. Not laughing anymore!

I have noticed quite a difference in the sound depending on what my Kimber cable does and does not touch. It does not like the synthetic carpet at all (neither do we:-) which clouds the highs (I don't know if this is caused by static or by some other reaction between the plastics involved). It does not like touching the walls (drywall) and assume that this interference is caused by vibration. I cannot hear a difference when it touches cotten rugs (over the carpet) or wood (pine), but prefer to have all of the wires and cables hanging in the air from component to component as this is a simple way to avoid any problems. I use cotton ribbon ties to hang cable when needed if there is an excess. I am working on a new setup (and location) that will be optimal in this reagrd. I would guess that other cables may not be as touchy. Another nice touch is separating the left and right signal and speaker cables from one another.