Re: wire. I would suggest 1-1,2mm magnet wire (pure copper, enameled). A good, fresh, beer helps, too:) Cheers!
- ...
- 15 posts total
Just go to any electronics supplies or electronics repair shop and ask for magnet wire (the wire used in winding magnets, voice-coils for speaker drive units, etc). They'll give you the wire for a few Euro. All you need are about 12-15 m to make a 3-3,5m pair of spkr cable. Cheers (trappiste beer is the healthy stuff) |
I would try an aftermarket powercord. I use the Elrod on my AA Capitole. Not sure about the Prima. Power cords tend to be used these days as tuning devises. I know my Audio Aero w. out the Elrod can be less than musical & slightly harsh. With the Elrod everything snaps into place. On another note,you will need time to let everything settle down to hear the benefits. Although you will hear a change right away,the long term listenability will be the ultimate decision maker. One last guess, is the Primas tubes might be noisy. It can happen. Elrods come up used quite often here. |
Renaat, Check this out for an effective, and reasonably priced solution: http://www.eighthnerve.com/response.html You can also search the archives here if you want to try and make something yourself. The Michael Green kits are around $250, and you will be amazed at what just a little room treatment can do to take the harshness out of the sound. Best of luck, Howard |
- 15 posts total