A tade more briteness - Jolida 302b. Tubes?

Gretsch6120, I think I posted this in your other thread, but this should do:

Powertubes: SED (Svetlana) EL43 or JJ E34L
I liked the SED a bit more than the JJ, smoother highs, a little softer bass, deeper soundstage. However, I had a couple of SED failing after very short time, with the JJ being very stable.

Preamp and driver tubes (my favorite combination)
12AX7 1970s Tesla E83CC Frame Grid gold pin
12AT7 1980s Mullard CV4024
Altnernatively the EH 12AX7 gold pin worked quite well also. Not as nice as the Tesla, but still good.

Preamp and driver tubes (alternative combination)
12AX7 1980s Jan GE 5751
12AT7 19??s BRIMAR 6060 T-Series Black Plates

The preamp tubes will have probably the greatest effect on the sound. The Tesla E83CC NOS or alternatively the EH 12AX7 Gold pin should do the trick for extended highs. Also, you could combine the Tesla with the Brimar 6060 and get a really detailed, lively and a little forward sounding combination. (A little too much in my system)

Good luck tube rolling,
Rene

You can DEFINITELY add more sparkle to the Jolida 302B.

First, you REALLY have to upgrade the tubes. I recommend JJ Blue Glass E34L, and Ei 12AX7/12AU7 tubes. Others seem to also like the JJ 12AX7/12AU7.

And, I certainly agree with Howard (Boa2) on cabling. In my experience, HomeGrown Audio Silver Lace is a most wonderful cable. It's engaging, without being harsh. Bass is also of note.

I've never heard the tyler speakers... But in general, an EL34 amp is a midrange amp. Cables and tubes are "tweaks" as far as I'm concerned, and shouldn't be relied on as tone controls. You might just be experiencing the limitation of the Jolida integrated amp, which is a midrange champ, but not a frequency extension champ. Try borrowing a Simaudio power amp (or another good SS amp) and use your Jolida as a preamp. See if this changes the tonal balance to your liking.

Goatwuss, the Jolida can't be used as a preamp, since it needs a constant load on the outputs. From my own experience I can say that the Jolida is limited by its stock chines tubes. Changing the input ones to other, current production or NOS tubes makes a big difference.

Rene

Cables and tubes are "tweaks" as far as I'm concerned, and shouldn't be relied on as tone controls.

Man, is this a tiresome refrain, and one that has no application in this instance. You are not looking to change the tone. You are looking for high frequency access. The information is there, on the source disc, and experimenting with cables/tubes in your situation will absolutely yield the result you want. End of story.