On metal cone drivers, such as on KEF speakers, small indentations will not impact the sound quality of the driver (per KEF). It’s more the mental anguish of putting a blemish on a beautiful speaker as well as resale value.
16 responses Add your response
To anyone who wants to reclaim the feeling of late 60s/early 70s free-form FM radio, or are interested in what it was like, there is a music podcast called Radio Free Gunslinger that perfectly captures it. There were 120 episodes and they are archived at the website below. Each episode is between an hour and an hour and a half, composed of four sets of music, and the only common thread is being off the beaten path. Rather than having a DJ between the sets, the program is "hosted" by excerpts of interviews with luminaries such as Vladimir Nabokov, Moms Mabley, Bing Crosby, Laurence Olivier, Larry Fine, Elvis Presley and Lee Harvey Oswald. The website includes playlists for each episode so you can see what sort of music is on offer. Here's the main link: https://radiofreegunslinger.blogspot.com/ Here is an episode I particularly like, hosted by Der Bingle, and ends with a long excerpt from "The Cradle Will Rock": https://radiofreegunslinger.blogspot.com/search/label/Bing%20Crosby
|
From my experience, dents may be in the dustcap in the middle of the bass driver in which case, unless the damage is extensive, it is likely no effect on the sound. My first task in my first hifi job at a Tech Hifi that specialized in refurb gear, was testing used speakers prior to attempting sale. Those with voice coil issues, usually due to being driven by amp that was clipping, had to have drivers replaced prior to sale. In many cases, the issue was merely a pushed in paper dustcap. Ugly and a defect for sure but no impact to sound. Solution: replace the dustcap, or the easy fix: use a safet pin to punch a small hole in teh dustcap and push it back out to normal from behind. THese speakers were then sold at a discount determined by magnitude of defects, if any. Common practice to this day. Dented soft dome or other material tweeters: different story. Any physical defect there is likely to have an effect on the high frequency sound. Could range from minor/not a significant issue to major. Devil will be in teh details. From experience I learned never buy expensive speakers with exposed soft dome tweeters unless there is a grill or some other way to insure no accidents. If you have young children in the house: doubly true.
|
Depends where. For a dome tweeter a dent can do a lot of bad things. The use of a vacuum is a great fix. Also, with some tweeters the dome is removable and you can fix them by pressing from behind. This is the preferred solution with tweeters, as suction in a small area may be hard to control without excess force in the suspension. Tweeters don't have a "spider" holding the dome in place. The surround is the only part of the suspension and it comes out when you disassemble the face plate, when manufactured to do so. That is, with the right screwdriver or Allen wrench the whole thing comes apart and gives you access to the back of the dome. Not true for mids and woofers I'm afraid. |
I used to own some wonderful Von Schweikert speakers. The dome tweeter of one was dented. On the advice of VS, I used the tube extension of a vacuum cleaner to remove the dent. The directions were as follows: with vacuum on and tube held steady, pointing straight at the dome, slowly approach the dome. When you get very close without touching, say an inch or two, it will pop out. I did and it did. |
A small dent in a speaker cone usually doesn't significantly affect sound quality because the cone is designed to flex and vibrate across its entire surface, meaning a localized dent doesn't drastically disrupt its movement, especially if it's only on the dust cap which is primarily a protective layer; the key factor is that the cone material remains intact and can still move freely to produce sound waves. Key points to consider:
|