The armature to which the cantilever is connected should remain symmetrically in the magnetic gap. Assuming the cantilever is installed correctly perpendicular in the armature it should remain perpendicular to the face of the cartridge while tracking the record. You always set up the cartridge by sighting the cantilever. But Lyra cantilevers should always be perpendicular to the face during play or the cartridge may not be performing at its best. The tether does not determine the angle. This is determined by the way the armature sits on the suspension.
The damper, the tension wire and cantilever position
This question is for Dover. I would prefer our ''heighest authority'' Carr but
am reluctant to bather his with possible silly question. Dover however,
whom I regard as ''second authority'' , is used to answer also silli questions.
Now my assumption is that damper to which coills are ,say, pressed
by tension wire balance cantilever/stylu combo in ''all directions'';
left and right and above and below . BUT they also MUST FOLLOW
the GROOVES.
My observation however is that also ''deviant'' cantilevers which
nobody would buy look STRAIGHT IN DE GROOVE. Ergo:: it is
the groove which determine cantilevet/stylus position .?
- ...
- 70 posts total
Dear edgwear, As support for Nandric ''thesis'' about his and Alesandro's character I must mention that all Blue Kiseki's , which BTW I all own are 5,2 Ohms . Two of ''Kondo's'' SUT's are made for those. The 40 Ohm kinds are an enigma to me.. But as I also mentioned (?) my Kiseki Agaat has ''deviantt cantilever''. My on induction based argument ( from one to ALL) is this same Agaat.. Despite crooked cantilever when it really counts the beauty behave as a real LADY. and folllows the grooves in straight ''position''. Otherwise ''she'' could not be described as a BEAUTY . |
Dear edgewear, From wrong assertio or premise one can not get triue conclusions. Your premise is that whole series Bleu is 40 Ohms while all are 5,2 ohms . For those Kondo san designed 2 SUT's , One of them is made from SILVER .Probable from 100 year old ITALIAN SILVER. This may be the reason for Alessandro's admiration. BTW for this one one should be looking . Than those 40 Ohm in between and your Lazuli as well my Black heart are again 5,2 Ohm . The nr 3 SUT is made for both 5.2 as well 40 Ohm but one need to switch between them with ALL intermediary wire, Not what one would call ''pure ' or conssequent solution . .
|
@nandric The askew Cantilever is present as a result of a change to parts that are designed to function in a particular way and are assembled to perform as a critical interface. The askew cantilevers Styli, when in the Groove may leave the impression the askew position has corrected. The likelihood is that the interfacing and critical function for the assembly of the parts as a optimised interface is now long passed and the present condition is best described as defunct. |
- 70 posts total