Stranded vs singal core conductors and skin effect


Yea, Yea, I did a search. I did find similar topics, but I still don't know which solution is preferable. Many mega-buck cables utilize solid core. Is solid core a better solution (conductor, etc.)? Isn't it the geometry (twisting, braiding, etc.) that addresses the skin effect issues? Are there other scientific reasons for utilizing stranded wire vs singal core? I am really considering making some DIY speaker cables. If for no other reason, than just for kicks - sounds kind of fun. I have read up on so many different theories. I realize that inductance and resistance are extremely important factors, as well as capitance, and for whatever reason, it must be a challange to design a cable with extreamly low measurments in all three categories?? I don't really fully understand why. HOLD ON - I don't want a complete lesson here. I'm just seeking some input from the engineering-minded or the knowledgeable DIY community as to which type of wire offers the best conductivity (and other factors??) for designing a DIY speaker cable. Additionally, which geometry is the preferred method?
2chnlben
Thanks for the "sound" advice. You know, I think I've simply been putting off the DIY project that really needs to be addressed in my system - room treatments. I've got the proverbial itch going as of late and I have been playing around with tweaks, but ignoring the acoustic treatments. Like so many, I want to maintain a nice "livable" area and at the same time, a good sounding area, without have one infringe upon the other. Besides, I’m having a darned hard time finding Owens Corning 700 series products?? Years ago, when I built a dedicated sound room for my first wife (it was for me at the time, but she ended up with it….because it was IN the HOUSE!) I was able to purchase it locally. Can’t find a local supplier now?? Boy, how I digress…this is supposed to be about cables. I think I’m past that now. Thanks!
Now you're talkin'. Room treatments potentially offer an upgrade of considerable impact for not much dinero if you go the DIY route. Acoustimac.com and other internet outlets are where you need to look for DIY supplies. After making four DIY bass traps, I couldn't believe how much improvement was realized for a weekends work and minimal cash outlay.
There`s a lot of legends around this theme. One is that thicker cores gives skin-effect, that`s just a farytale as long as we talk about audio frequenses.
In princip there should be no multicore anywhere in a system if you want the ultimate. Not only do the signal run blindly between the different conductors and by that generating a lot of distortion/energy loss, houndreds og hairthin conductors do not work as well as onr thick even if it does teoreticly.

I`ve done a lot of research on this, in any level from ic`s to powercords. Not any solid conductor will do, the best stranded might outperform some solids. Flat/foil is not optimal, even if the legend tells so.
The whole powercircuit from trafo secondarys and all the way into the speakers voice-coil should are were sensitive to resistance and should be done in heavy gauge solid core. One of my best uppgrades was a set of custom-built trafor for my poweramp, completed with a set of solid core powercords.
"I am an engineer." So am I.

Don't ever let anyone hit you over the head with college degrees, experience, or whatever. In other words, you don't have to be a cook to know what things taste like. Try things out, and come to your own conclusions. Regardless of how things measure, I've learned enough to know that my ears are the most important piece of equipment I will likely ever come across. If you hear the difference, it is real.