Fuzzy white noise sound coming from tweeter?


Hi everyone, I just bought a floor demo model of the B&W 702 S2 paired with a demo model of the Rotel RA-1592 integrated amplifier and connected with Rocket 11 speaker cables. I noticed there is a quiet static or white noise sound coming from the tweeter on both speakers. It does not seem to increase in volume when I turn the volume up and I cannot hear it much from where I sit, but it is very pronounced when I put my ear up to the tweeter while playing a song. The noise is also there when I pause the song and apparently anytime the amplifier is on. The speakers are not bi-wired. I was told that maybe this could be caused by intereference with power cords but I moved all the wires away from eachother and the problem still persists. I have also tried playing movies from a bluray player via optical cord and that is also having the same issue. Could this have anyting to do with the break-in period? It is not overwhelmingly noticable from where I sit but I think it is slightly masking the clarity of the high frequencies. I would try to isolate the issue using other speakers/amplifiers/cables but I do not have any others to subsitute in. If anyone has any ideas or suggestions I would greatly appreciate it!
km1181
You'll most likely hear some hiss from any amp at idle with your ear against it. 
Thank you everyone for your responses, I will try out some of the suggestions. Also to clarify, it is difficult to tell if I can hear it or not from where I sit (9 feet away from speakers) it is mostly just when I put my ear close to the tweeter. It probably does not have a significant impact on the sound, I just want to address this if there is a defect in my system. Thanks!


Well first of all you have to isolate the fault to either the amp or speakers so therefor do you have a friend who can loan you and amp so you would be able to hook up the speaker to and see if the hiss still comes through.
He has "it doesn’t go up or down with volume" that means it’s the poweramp section of the Rotel that is noisy on both channels, needs to be looked at, tweeters are fine.
With these figure it should be quiet
S/N RATIO (IHF "A" Weighted)
Line Level Inputs: 103dB Digital Inputs: 102dB

Cheers George
OP, isolate the problem.  Try different speakers on the amp.  Is the hiss still there?  If so, try a different amp on the B&W’s...

if you don’t have any other equipment to utilize, borrow some from the dealer where you purchase the gear.

If you cant do that, move the amp and speakers to a different electrical outlet.  Only plug in a source.  Still hearing the hiss?

Quite a few systems have that hiss.  Usually it gets louder though as you increase the volume knob, even with no music playing.  Some metal domes that are very detailed and revealing will play that hiss noise louder than some silk domes.

That hiss comes from the amp though, not the speakers.  Different speakers however may accentuate the hiss more simply because it is s brighter, more detailed speaker.

Im sure someone whose more knowledgeable will chime in and correct me or add to.

I’ve looked at that hiss as part of how low your noise floor is, ie how black the background is.  When there is no hiss and a system can retrieve micro detail really well, you have a very dark canvas from which the music comes from, if that makes sense...
If you hear it from the listening position, something is amiss. If you are just hearing amp idle hiss when your ear is next to the speaker, that is normal.
I have a Rotel amp on my rears. They are noisy amps, don’t worry about it really. It is the amp for sure. Also owned the 703s2 at one point too. 
If the noise is present when no sound is playing through it...at idle...there is a problem with the amp.
Sounds like it's the amp.
If you don't have 2 or 3 others laying around to test you're going to have to borrow one or two.
I apologize that was an accident and I am not sure how to delete the other thread.
you should see an icon.....click on that and it gives you the option to edit or delete.               
Can you not ask the dealer/shop where you purchased the components from to let you borrow another amp ad/or power cord to try? If not, try to remove any other appliances that might be sharing the same power line or power strip.
I apologize that was an accident and I am not sure how to delete the other thread.