dan_ed
Responses from dan_ed
| TriPlanar Tips Nandric, what are you referring to? My triplanar VII came with 3 weights. | |
| I built my own Turntable and here are the results Galibier tables don't have detached armboards. In my conversations with Thom I believe that even the Redpoint armpods are bolted to the plinth. | |
| 30 ft rca run too long for a phono to preamp? Resonant frequency of the arm/cart has nothing to do with acoustic feedback, so don't let that fool you. Anything from about 200Hz down can cause issues. You definitely have your hands full with springy floors and a somewhat tight space. I'm not s... | |
| 30 ft rca run too long for a phono to preamp? What table are we talking about and where do you have it currently with respect to your system pictures? Are you thinking of moving that stuffed chair and placing the table there, next to the truss? | |
| Green light from spouse - now what Kip, why not share the details on your room plans? Is this an addition or remodeling a basement? How crazy are you going? Yes, i have my lucid, somewhat social moments. :-) | |
| Direct drive/rim drive/idler drive vs. belt drive? One other thing I wanted to add was with respect to what can perceived as a cartridge alignment issue, which in reality is actually a micro-dynamic speed issue. I don't know what other term to use to refer to this, hopefully you guys can get a hin... | |
| Direct drive/rim drive/idler drive vs. belt drive? While it has been several years I do remember hearing a demo of the prototype Teres Certus. I recall that there was/is a difference between the Certus platter and that used on the non-DD Teres tables. One of the differences was the use of a signif... | |
| Green light from spouse - now what Kip,I was thinking that just about any sturdy/stout table, desk, other piece of furniture should work as long as it has the surface size adequate to support the vibraplane, assuming that all of your TT gear will fit on the vibraplane. I also see t... | |
| Direct drive/rim drive/idler drive vs. belt drive? Mark, I think you'll be surprised at what can be achieved with standard AC motors and belts even less compliant than your Mylar when the drive mechanics are understood.If it isn't giving anything away, how is the filtering by the belt done differe... | |
| Alignment tool for SME V + Shelter But I really do like fried baloney! :-) | |
| Direct drive/rim drive/idler drive vs. belt drive? HI Matt, I can't help with the technical questions. I will offer this. My wife and I decided to stop "working" on our relationship after the first three years. That's when my first son came along. After that we just "worked" on making it through t... | |
| Alignment tool for SME V + Shelter I was hoping that wasn't what you meant, and yeah, I do know better. ;-) I think of it this way. I can use my framing hammer to do finish trim work, but I can get much better results with a finish hammer. | |
| Green light from spouse - now what I concur with the other posters. Get a dedicated room if you can. If not, the first thing is to get your tables out of/off of that Salamander (at least, it looks like Salamander). I would think that with the Vibraplane all that you really need is ... | |
| Alignment tool for SME V + Shelter The implication that certain arms/tools can provide 'tighter' setup tolerances is just baloney as I see it.Well, I like baloney. Especially fried. So I guess that the rather large population of A'goners who have achieved better results using both ... | |
| Direct drive/rim drive/idler drive vs. belt drive? I want to ask opinions on belt approach that Hiho has mentioned a few times. I was also of the opinion that any kind of compliant belt was not going to be the best solution. It seems in my brief experiences with speed controllers of late that with... |