Turntable suggestions for a newbie

Thanks kennyc. I'm enjoying it.   Cleaning the hell out of everything 😄 

Only thing that's hard for me to wrap my head around is why all the other TTs at this price point ( to my knowledge) weigh so much more. Seems like completely different approaches with Regas being in the minority.  

@sandrodg73 - Rega Planar 8 - great choice.  All the previously mentioned TT were also solid choices.

I do have an extensive classical LP collection that was my dad's. 

Make sure they’re adequately cleaned to increase sonics.

@zufan +1 I bought the PLX1000 to satisfy my curiosity about how good it is after reading Herb Reichert's review in Stereophile. I need another turntable like I need a hole in my head!  I bought mine from Music Direct for $799. This is hands- down the best TT under $1K.  I say it's as good as my old Technics 1200! Excellent build quality - a fine arm and a solid damped plinth. I am keeping mine! I put a Denon 103R on it. 

Pioneer PLX-1000. I just bought mine for $800 on amazon & it's as good or better then the other 5 I've owned, mostly belt drives. 

Moreover, has the best vibration control, being a pro DJ model. 

Thanks kerrybh and dentdog. I appreciate positive feedback 

I've been playing my planar 8 through my Anthem AVR.  Not ideal I know but I want to know how the table sounds before I introduce tubes , which is something that will be a learning curve too. I my son brought an Eminem album over and a neighbor some techno LPs and im telling u now that the bass was fantastic.  The Anthem ARC helps im sure, but what I'm more impressed with is that while listening to a second hand Rumors album and comparing it with the same off of Quboz, the instruments sound more real and sound has more depth, if that makes sense.  Maybe new owner bias but wife agrees.  Can't wait to get a tube amp.  Pretty sure I'm going with Raven

I'm 90 percent vinyl. Lots of good suggestions above and as usual the audiogon posters are very helpful. Aside from equipment only one problem. Until you have a good area to place the table maybe wait. Especially if you like good bass and play it pretty loud. Else get a good wall mount. 

Congrats. I had a Rega Planar 6 and it performed very well. I'm sure the 8 is even better. I think Rega intends to take every unnecessary ounce out of their tables-part of their theory. I think you will enjoy the vinyl experience. Everyone has different preferences but you clearly have thought this through and I hope you have many hours of happy listening. Also hope you have a good used record store nearby. Enjoy

Landed on the Rega Planar 8.  Not only rated well and recomended by my local hi fi store( shout out to Saturday Audio In Chicago) but the minimalist design fits my living space.  I'm a little apprehensive because it is such a minimalist design and so light that it kinda feels cheap. Initial listening on less than stellar LPs has me liking what I'm hearing however. Im using a Hana EH MC HO cart with a Schiit Skoll pre.  

I bought my First TT in 1973 AR X1 Shure cart from Crazy Eddies cost $99 bucks.Sold it didn't like the manual.Next bought a Technics SL 1350 with Shure V15 111 cart cost $389. buck...I still own it.But sold all my Lps in 2012.Bought a Fluance 85 with Ortho Blue $400.but I don't like getting up at the end of the record. Bought alot of Mofi 45 rpm lps. I'm not going out and buying a 3,500 plus 1,500  cart.I'm retired 72 and don't have the money.

I would recommend revisiting the ClearAudio option.  I have owned VPI, Techniques, Origin Live, among others and had a ClearAudio Concept Air on extended loan recently.  It performed at a level well above my expectations and had very non intrusive aesthetics. 

In relation to Looks Matter - In relation to ones 'better half' showing a tolerance for a item to be used for the occasional replay of recorded music using a a Archaic Medium to produce the facsimile of the recorded data when the Stylus is reading the Modulations.

The device required to enable this type of replay to occur soon becomes a Dust Collecting Carbuncle in the Space they are trying to have a feel good factor about.

The Archaic Medium on show will be as welcome as a Naked Picture of ones Mothering Law above the Marital Bed Head Board.

Man Caves are Marriage Savers for good reasons.

Every Man with a Partner Sharing their Living Space needs a Man Cave or alternatively, a Friend who is salvaging their own relationship through having a with  Man Cave, hopefully their is a Friend who has shared interests. 

I've owned a Mofi Ultradeck for almost two years. In that time, it's been a pretty a solid turntable, requiring little to no intervention. I think it sounds a little more tone rich the the Technics I also tried at the time. However, one thing I wish I would have known before I purchased it, is that is has a very heavy 24g tonearm. That heavy of a tonearm can be a bit limiting in cartridge choices. Though all the MoFi (rebadged AT) cartridges would be compliant.

Music Direct says they have installed many out of compliance cartridges on them, and other people have posted on various forums about using out of compliance cartridges, but I'm not so sure I want to spend $1k plus on a cartridge to find out.

I probably would have gone in a different direction had I have know. Either with a Sota Escape with an Origin Live Silver tonearm or a VPI.

It's in a living room and needs to be wife approved. So yes. Looks matter. Looks matter in all of this hobby. Don't kid yourself.  Someone else had the same ridiculous notion of why one would buy a record player without records. That's ridiculous and dumb as hell.  Why would one have records without a player???   BTW genius, I do have an extensive classical LP collection that was my dad's.  Vibration isn't an issue.  It's been checked. 

Thanks

You care too much about how it looks. Why are you getting into vinyl if you don't have a large record collection (this coming from a 90% vinyl guy)? If you are putting the TT into a spot where it is subject to excessive vibration, plan for spending $$$ to address that, unless you don't intend to listen to it (which it sounds like is the case).

Wasn't quite finished..I have 2 tonearms and the super polytable would be terrific.  

Best of luck

VPI makes a fine TT & I have used mine for decades. I have implemented multiple tweeks with the assistance of George Merrill.  Link : https://www.hifigem.com/polytable/

His Super Polytable would be on my short list if I were just starting out with vinyl or wishing to upgrade. Check out the link and all of his offerings.  Most highly recommended. 

It's all about the sound!

As a complete curve ball proposal, the following will fit the proposal quite fittingly.

There will not be too many who disagree with the Purchase Values of the Items in the Links.

There will also not be too many who disagree with the use of such Items as a TT > TA > Cartridge > Plinth. In my view at such asking prices, it is a great starting place, which if all goes well as a used item sale, will be one that is most likely to appreciate in value.

There is always a risk to buying Vintage and Imported, but many many have done this and there are those that remain doing it as well. I myself have numerous purchases made from the site in the Links with only a couple not working out exactly as planned.  

Add $300ish as the additional costs for a combined shipping and Import Tax.

The First Link gets a TT > TA > Cartridge > Plinth with the TT's Electronics having been refurbished and the claim made the function is proven. 

The TT as a lone item has the evidence shown it is working at both 33 and 45 rpm.

The Tonearm as a lone item has a massive following for its qualities.

The Plinth as a Lone Item is a Mass Design, it will be one that can be contentious as there is the endless debate about a Material and Structure used for a Plinth, especially Mass vs Light Weight. On the same sales site, there are Wood Structure Plinths as well, these could be veneered to create a aesthetic that has extra appeal and fits in better with a rooms decor.    

https://www.fromjapan.co.jp/japan/en/auction/yahoo/input/p1073298992/

https://www.fromjapan.co.jp/japan/en/auction/yahoo/input/l1155224548/

https://www.fromjapan.co.jp/japan/en/auction/yahoo/input/1156118058/

https://www.fromjapan.co.jp/japan/en/auction/yahoo/input/h1156210363/

The following is not my recommendation as a Cart', it is a pointer to what can be achieved as a Purchase. Of this actual Cart' is supplied and capable of 400 hours of good replays? This outcome would be close to $00.50c a replay, which is a Bargain. If the Cart' proves to be very attractive in use, it is one that can be retipped to offer another 1000ish Hours at approx' $00.50c per replay, the attraction is being maintained and the Bargain of usage cost is extended for the longer term.   

https://www.fromjapan.co.jp/japan/en/auction/yahoo/input/w1156131679/

As in all Used Item Sale Purchases CAVEAT EMPTOR is ones best friend.

My old VPI 19-4 has rubber/spring sprung suspension and works well as is in preventing vibration problems.  My VPI TNT6 has a terrible Delrin footer suspension and is used on top of a Townshend Seismic Sink (fantastic combo).  So, when purchasing a VPI table, analyze the suspension because it could be excellent to terrible requiring a platform (such as the newer Townshend spring suspension footers or platform.  Only changed belts (many times) in 42 years for 19-4 and TNT6.

I bought the VPI HW 19 Mk II with a Sumiko MMT arm and a Koetsu Black in 1985 from Sound By Singer.

I was going to upgrade to a VPI Classic around 2010, but Harry (Weisfeld: the "HW") told me that for $800 to $1,000, I can save myself $4,000 by simply upgrading the HW 19 to a Mk IV and I will have a table that is as good or better (the design philosophy change was forced on them by the EPA: no more lead rings in the platter). So I did.

I am taking it in to VPI to mount a new Jelco 750 arm and to give the table a lookover and tune up later this month.

In other words, I have a table that I have been using for 39 years. I expect to use it for another 25 years or until I die, whenever is later. Can’t beat that for value. BTW someone there told me that 82% of all their tables are still in use.

VPI has great products, and they "take care of their family" of customers after they close the deal.

As for arms, both have detachable shells. That’s allegedly not the best thing, but I need the convenience of switching cartridges. I am still getting terrific sound, so I stay with the convenience.

If you're buying a used Scout that comes with one of their unipivot tonearms included in the purchase price, and if you don't want a unipivot, I do in that case understand your conundrum.  The solution might be any one of the following: (1) Ask the seller to keep the tonearm and reduce the price accordingly, or (2) buy and install the stabilizer that I think VPI sells for their unipivots. Although unipivots are not held in high regard on this forum, they are not so terrible as all that, especially when stabilized, and your system is not going to suffer.  Or (3) find another deal for a VPI without tonearm. Then buy separately the tonearm you desire, whatever that is. You are by no means restricted to VPI in your choice of tonearm.

The Link will show asking prices for VPI across a few years with the most recent to compare. It should help identify where noticeable depreciation can occur with certain models.

Knowing depreciation can help be the deal maker/breaker on certain purchases.

My TT Purchases over many years have always appreciated, this is the better place to be, if one is totally satisfied with their TT’s capabilities.

https://www.hifishark.com/search?q=VPI

Very true Lewn.  Unfortunately that would probably put the scout above my budget. Maybe I'll email vpi to see what options they for that table that wouldn't blow my budget. I know the arms they list on there site are all over 1k

If you have the money to build a wall mounted shelf, do it. De-coupling from the floor works.

Scout is a turntable. There is no reason you could not mount a non-original (that is, a tonearm that is not unipivot) on a Scout TT. Dozens of tonearms qualify.

The Scout is. Unless their site hasn't been updated

NewerVPI tonearms are not unipivot.

I’ve had several VPI TTs and would recommend them.

I’ve got a Prime 21 with a gimbal arm but wouldn’t be scared of the Unipivot.

I run a Soundsmith Zephyr MI cart but the Otello would be a good cart to go with.

Go with a VPI…

Thanks. I think I'm over the vpi thing now.  The unipivot kinda scared me off. The isolated drive also is a bit impractical for my real world scenario. So that's another mark against vpi and kinda rules out the Michell Technodec.  I'm now on to Rega or EAT or a used Avid Volvere if the price is right.  My default is think will still be MoFi.....maybe.  this kinda sucks but fun at the same time. I'm driving the wife nuts.  Thanks for everyone's input. I

+1 @noromance technics is very solid and extremely easy to work with.. 

I have had Two VPI Primes, and would discourage the unit and brand for workmanship issues. It will require the addition of dual pivot, the tone arm lowering devise was replaced twice still doesn’t lower slightly or straight. In addition I had the send back the Speed Controller, hum and indicator light. I’m so frustrated with VPI. And everytime returns had to go thru dealer rather than direct waisting more time.  Rethink VPI

My Marantz TT-15S1 is a nice TT (made by Clearaudio), but if you prefer a different TT, I would recommend that you consider the Hana ML moving coil cartridge and the Sutherland TZ Vibe phono stage.  The Sutherland is lesser known, but there are a lot of really good reviews of the Hana ML cartridge. That pairing brought my vinyl playback to the point that it gives my digital setup a run for it's money. 

I've thought about that believe me. Thought process is to get good enough gear that with the swapping of tubes or carts it will satisfy my itch for years to come. The other rout as you suggested, I've went down with my digital end and within a year I had completely revamped my system. So in the long run I would have been money ahead with better gear to start with.  Problem was I didn't have the knowledge or know what I was missing. Hence the rabbit hole of pursuing better sound.  I know what pretty damn good sounds like now. So I just assume to start my analog journey at about the same level as my digital set up and do it in such a way that allows growth and not get discouraged because the sound is inferior to what I have already.  I hope that makes sense.  Not saying it's the correct way of thinking of things it's just how I'm looking at it.  

Are you sure you want to go whole-hog on a turntable right off the bat? Might it not be better to start with something a bit less expensive (but still fine) to "get your feet wet?"

For instance, a UTurn Audio Theory with an Ortofon 2M Bronze for $1,239? Or a Technics SL-1500c for $1,299? There are many others in that price range.

Just a thought. You'll get at least 90% of the performance for 40% of the cost of a mid-line VPI or similar.

3 to 4 k.  I have looked at projects. They may be in the running.  Aural is selling a used avid in my range that looks killer. I'm like a kid in a candy shop....too many choices.  

What is your price point? Have you looked at Project TT's?

If your Ortofon is not that great it's worn out (go to Soundsmith for repair) or is not set up correctly.   I have a Windfield on my VPI arm and it sounds great.  Some complain of VPI's unipivot arm....I attached their optional 2nd pivot.....happy.

I had a VPI scout and used it for about 20 years.  VPI may not be a good choice if you like to switch cartridges (I currently rotate between 3 cartridges on a regular basis)  If you do want to do that a different tonearm may be indicated (one with a removable head shell).

I currently use a rega turntable which is very easy to set up and installed a grace tonearm on it from the 70's.

VPI is good but a bit fussy to set up.

Passed water test!!

@grislybutter said "Maybe vinyl is not dead, after all..."

I firmly believe that one day, maybe in 50 years, maybe in 150 years, vinyl will be played on the moon and on Mars and listened to via a tube amp. ;-)

@chayro +1 for the glass of water trick. Excellent. Just like in Jurassic Park. 

Note that Technics have a new upgraded model coming out without the DJ functions so it looks clean. You can buy aftermarket wood surrounds if that suits. SL-1300G.

Pairing it with a Nagaoka MP500 (and a SpinClean record cleaner) would get you running.

us.technics.com/products/grand-class-turntable-sl-1300

I've always had a turntable. I have several hundred albums, but a small collection compared to most vinyl guys. 

About a year ago, I decided to see if vinyl could sound as good as cd.  I bought a Marantz TT-15S1 which comes with a Clearaudio Virtuoso Ebony Wood cartridge. Used a Sutherland KC Vibe phono stage.  Despite good reviews, the cartridge didn't blow me away.  I next bought a Hana ML moving coil cartridge and upgraded the phono stage to a Sutherland TZ Vibe.  Now, it sounds really good. 

I bought quite a new albums including some pricey quality pressings.  Played vinyl for a number of months, but after upgrading my streamer, interest in flipping records fizzled. 

I just talked to a local dealer and he has a Clearaudio Performance DC table with a Clarify Carbon tone arm and Virtuoso V2 cart. He says it's in mint condition.  Asking 3300. Anyone have a thought on that deal?

It's just an OK deal. For example, I just traded in a Performance DC with the Tracer tone arm. I paid $5600 new with a Hana ML cart. The issue is the Clarify arm is 2 levels down from the Tracer and the Virtuoso V2 isn't as good as the Hana, both $1200 list. I think you can do better for $3300.

I have no experience with VPI, but the 2 Ortofon carts in the Upscale package are not that great.

Lastly, James Connell at Raven is the real deal. A musician, recording engineer (mostly classical) and an all round good guy.

another interesting option in your price range is the Thorens TD-1500.  

Sorry wasn't done

Ortofon 2m black 500

Soundsmith zephyr MIMC ES $1700

Soundsmith Otello ES 400

Sound like a good deal?

Thanks puptent 

Upscale Audio has VPI Super Prime Scout 21 with the 10.5: arm,and  VTA on the fly (not really sure what that is) for $3899 and they are giving a choice of 4 cartridges:

Ortofon 2m bronze $300

Yeah, go with the Vpi... If nothing else, it will hold its value a little better. I have a Michell, actually the '23 Transcriptors with the Onyx arm. The lift off dust cover (which I prefer... Lower the attached lid when playing; a raised cover is a noise and distortion antennae) was easier to find than a drive belt. The Vpi is a more well known product with a bigger aftermarket. The only thing I would suggest is staying away from the Uni Pivot arms on a first TT., and factory support from Vpi is at hand. As to cartridge start out with a MM like Ortofon M2 series, Black or Bronze, or another high quality unit...Clear Audio, maybe. I recently purchased a second hand "upgraded" (many MM can move up with a stylus upgrade) Nagaoka, which has proven to be impressive. And since I've been disposing the disposable income on these things for 50 years I have a nice collection of Shure V15's (The real money goes to JICO), Most MM carts utilize a replaceable stylus. Which, in a way, becomes something like tube rolling. and it's set up set up set up.

Good point

Of the three turntables in the initial post, two are modern art without a practical dustcover. I've tried that route, and have found that I prefer to have a dustcover from the factory as a part of the table itself.

There are large plexiglass covers available in the aftermarket, but they require additional space, and a spot to place that cover when you want access.

Well said Kerrybh 

Thank you