Zavfino.
Recommendation for new cables
Hi everyone. I'm planning to recable my system which is currently composed as follows: ARC Ref 3 (preamp), ARC Ref 110 (amp), dCS Bartok (DAC/streamer) + dCS Rossini (external clock), Accuphase dp67 (cd transport only), Wilson Sophia 2 (speakers) and Roon Nucleus.
Ideally, I'd like to use only one brand to have synergy across the system and I'm not planning to spend crazy money.
I've been recommended to go for Transparent Audio Ultra but would love to see other potential options.
What would you recommend based on my system? Also, where would you start from?
Thanks in advance.
F.
Ideally, I'd like to use only one brand to have synergy across the system and I'm not planning to spend crazy money.
I've been recommended to go for Transparent Audio Ultra but would love to see other potential options.
What would you recommend based on my system? Also, where would you start from?
Thanks in advance.
F.
62 responses Add your response
Post removed |
+2 MIT MIT should be required speaker cable for Wilson speakers. Interconnects less so. https://www.audiogon.com/listings/lisaaj1e-mit-matrix-60-rev-6-feet-single-wire-banana-loudspeaker-c... |
Post removed |
I recommend Silver Smith fidelium speaker cables (1k). They are amazing for the price and are truly reference quality. I have tried many speaker cables (3-5K) and this bested them all. Read reviews too, they are all true, every word of it. I did not believe it until I heard. Best part is you can trial it for a month and if you don't like it, you can return it. Don't pass this cable on without trying it. For IC, you will not go wrong with Shunyata lines. For power cords, I have heard that Clarity Vortex (400$) are very good and even they offer trial. I have personally not heard these, but a fellow audiophile, whom I trust, has changed all his power cords (expensive named brands) for those and he is very happy. Just my 2 cents. |
This is a hard question to answer as it’s your system and your ears . One generalization that I’ll suggest is system brightness . If you have any glare or brightness , I’d avoid any cables with silver . I also believe that it you replace just your favorite source and/ or pre amp with a given brand, you’d have a good idea of the flavor that brand would bring . So I tried Anti Cables and then Morrow this way . My system has Morrow level 4 IC’s, Speaker cables and power cords . Also Morrow takes 400 hours to break in . I paid for extended break in time for the IC’s but not the speaker cables or power cords . The 2 brands I mentioned paired well with my system as it was too bright with any silver in the cables or Silver plates on my driver tubes . I do however use a Shunyata Venom 20 amp to feed my Richard Gray power filter and a Cardas Clear to connect my laptop to my Schiit Yiggy DAC . Also during this process I changed my outlets to medical grade Hubble and cleaned/treated all my connections with Deoxit . Happy hunting, Mike. |
Hi lalitk, yes we agree OCC cables are excellent and find I mostly prefer solid. If you read my post again you will see we are on the same page Regarding my sentence : “Your desire for only one brand to have synergy across the system is unlikely to provide that to your quality components” You may notice in the above sentence that I mentioned 'unlikely' and was not intending it as a 'will definitely not'. |
“Your desire for only one brand to have synergy across the system is unlikely to provide that to your quality components” @lemonhaze, I beg to differ at least in case of analog cables. Digital cables are all together different animal and require some tinkering. I do not believe in cables with ‘gimmicks’ and after hearing all analog OCC copper cables from Audio Envy, I can say unequivocally that cables can be as transparent as ‘water’ thus devoid of any house sound. The synergy in my system is simply off the charts between AE power, speaker and IC’s :-) AE uses OCC copper in their PC, Speaker and IC’s. https://audioenvy.com/product/power-cord/5732/ |
Your desire for only one brand to have synergy across the system
is unlikely to provide that to your quality components. Except for cable companies that use magnets or filter boxes or liquid metal in their cables you are probably not going to find a 'house sound' I build my own cables and do not understand how a cable company could ensure that all cables produced by them exhibit the same style of portraying the signal. Lets take for example single strand OCC solid wire which I like and use a lot. This is great for internal speaker wiring, interconnects and speakers cables but not easy, though not impossible, to use for power cables. The single solid core does not allow for a flexible joint and is subject to fatigue and failure which for a power cable could prove dangerous. So a manufacturer might build using solid core wire for his cables except where he sensibly would choose stranded for the power cables and in doing so would upset the house sound. There is more to this but the point I am trying to make is that cabling from only one brand does not guarantee synergy. In fact it's more likely to prevent it! Wiring a system is an iterative process. An example : you obtain 3 power cables to try and you find PC No.1 to sound best. Next you do the same with 3 different interconnects, make your choice and then repeat this with speaker cables and find now that there has been a big upgrade in performance. Now just for fun you go back and re-listen to the power cables and now with the effect of the new IC and speaker cables installed you find it much easier to hear differences and perhaps resulting in PC No.2 to now be clearly the best and on it goes. Good luck with your quest. |
You would be wise to seriously look at Luna Cables. They make 5 different grades so any budget will work. Talk to Danny Labrecque. He's a half owner and personally hand makes each cable. I bought their Noir (black) cables (the highest level) for my entire rig. They completely transformed my system, which is comprised of the Naim NAC 500 amp, Naim NAD 552 pre-amp, Naim CD 555, Kuzma Stabi XL TT with Naim SuperLine phone stage ,a Revox PR99 MK II reel to reel, and Grandinote Mach 36 speakers (the only pair in the world). As each Luna cable was substituted for other ones (too many to mention), the improvement was astounding. Luna is a fairly small, but rapidly growing, company based in Quebec. Excellent customer service matched only by the excellence of their products! |
Post removed |
There is a lot of good product on the market, and a lot of not-so-good product as well. How does one choose? The recommendations here can lead you to becoming dizzy. Nobody means harm, it's just that there are so many choices. If it's a one-brand way that you wish to do your system than I wholeheartedly can recommend Audioquest. That's what I did and couldn't be more happy. Go to their website and look at the left side column for categories. Near the bottom you will find a PDF for the 2020 Retail Price Book (unless they have already replaced it with the 2021 edition). The first pages tell a great story about their design philosophy and offers quite an education on metals, extrusion, and other materials that make up their cables. Each product category also has a nice story about the respective products and models. Even if you choose a different brand, you will have learned quite a lot from reading the Audioquest information. Best to you, I hope that you land on products that are satisfying to your needs. |
Post removed |
+1, rdk777. I can’t recommend The Cable Company based on my experience....their customer service is not what it used to be. Unless you’re ready to drop 6 figures on cables, you will be forever in the ‘queue’ for cable trial. I waited over 2 months for USB cable trial and the excuse I got from Peter, “sorry we forgot about you”. |
Post removed |
I can’t recommend buying cables based on Forum recommendations. These guys are all trying to be helpful, but everyone’s system is nearly unique and cables will interact almost uniquely with everything you’ve got. If you’re not near a dealer that will let you try them, go to The Cable Company, or someone like them, who will let you try cables in your system until you find some you like. I bought some Audio Envy based on comments here, just out of curiosity (I couldn’t find anyone who let you try them) and although they are very good for the price, my 25 year old Gryphon cables beat them soundly. You got expensive gear, I’d shoot for something better. |
Simple audioquest type 4's for speakers is all you need. No need to spend more. An affordable and balanced cable, what more can one ask for? There are a host of uk products for interconnects, including Qed, Atlas, chord, and ecosse. They all offer affordable versions that do the job. I use interconnects from each aforementioned company with good success. |
@frankie67 I'd agree with @lalitk on this. I've just started my journey with Audio Envy about a month ago, but I can tell you that the two power cords I purchased both significantly bettered the $1k power cords they replaced. Really, I couldn't believe how well they work in my TAD Evolution 1 system. Will be ordering more soon. |